Red Bull RB15

A place to discuss the characteristics of the cars in Formula One, both current as well as historical. Laptimes, driver worshipping and team chatter do not belong here.
User avatar
gandharva
252
Joined: 06 Feb 2012, 15:19
Location: Munich

Re: Red Bull RB15

Post

The delay to Monaco could make sense, as I think they plan to also move some internals around and need Honda to do changes for this task. E.g. that huge cooler on top of the air inlet (marked red) could probably move much lower. They could split it up (yellow triangle). Similar to what they did in the last year with the Renault engine. This would also be in line with what Rob Marshall said recently about 'free gains'. They could then narrow down the cooling inlet. -> Lower cog and better airflow towards the rearwing.

Image

mbchc
mbchc
2
Joined: 13 Feb 2014, 14:37

Re: Red Bull RB15

Post

Mercedes AMG Petronas
AMG|||

roon
roon
412
Joined: 17 Dec 2016, 19:04

Re: Red Bull RB15

Post

mbchc wrote:
17 Apr 2019, 02:41
Anyone noticed that this year, tyre comes with a glossy finish when they are brand new, and slowly turns into a more matte finish as they wear down.
https://twitter.com/pirellisport/status ... 2238588930

GhostF1
GhostF1
110
Joined: 30 Aug 2016, 04:11

Re: Red Bull RB15

Post

gandharva wrote:
14 Apr 2019, 10:18
The delay to Monaco could make sense, as I think they plan to also move some internals around and need Honda to do changes for this task. E.g. that huge cooler on top of the air inlet (marked red) could probably move much lower. They could split it up (yellow triangle). Similar to what they did in the last year with the Renault engine. This would also be in line with what Rob Marshall said recently about 'free gains'. They could then narrow down the cooling inlet. -> Lower cog and better airflow towards the rearwing.

https://abload.de/img/engine_reworkk0jkl.png
The layout is near identical to Merc's last year. They have a radiator sitting on top the intake plenum also. What's interesting is it looks like they have gone back to bag wrapping the exhaust manifold. They did this with the 2017 RA617 but for 2018, the RA618 had clearly stepped up the size of each runner and gone to individually wrapping them. They said in 2017 there was no gain in wrapping them separately, strange they are jumping back and forth.

Bill
Bill
8
Joined: 28 Apr 2018, 10:28

Re: Red Bull RB15

Post

Mercedes never had a radiator on top of the intake plenum,Honda had this solution during its Mclaren days and last year with Str

User avatar
yener
4
Joined: 09 May 2011, 00:00

Re: Red Bull RB15

Post

markoc wrote:
13 Apr 2019, 09:37
Is it possible that mechanical issue from Bahrain was diffuser flexing?
No, the diffuser doesnt flex. The problem was, a premounted part of the suspension. It wasn't mounted right and that caused them to be unable to find a good setup.

Beside that, the rear is still twitchy. Not the diffuser, the whole rear of the RB15 lacks grip, which hurts them in slow corners but also high speed corners.
"Life is about passions - Thank you for sharing mine" MSC

User avatar
godlameroso
309
Joined: 16 Jan 2010, 21:27
Location: Miami FL

Re: Red Bull RB15

Post

yener wrote:
17 Apr 2019, 14:26
markoc wrote:
13 Apr 2019, 09:37
Is it possible that mechanical issue from Bahrain was diffuser flexing?
No, the diffuser doesnt flex. The problem was, a premounted part of the suspension. It wasn't mounted right and that caused them to be unable to find a good setup.

Beside that, the rear is still twitchy. Not the diffuser, the whole rear of the RB15 lacks grip, which hurts them in slow corners but also high speed corners.
So what is the cause? Is it aero, suspension, a combination of those things and some parts which just need some development? The engine installation has a huge influence on the balance of the car, and Red Bull themselves say there are free gains in developing that aspect.
Saishū kōnā

User avatar
MtthsMlw
1033
Joined: 12 Jul 2017, 18:38
Location: Germany

Re: Red Bull RB15

Post

Image
via f1i.auto-moto.com

User avatar
yener
4
Joined: 09 May 2011, 00:00

Re: Red Bull RB15

Post

etusch wrote:
12 Apr 2019, 20:34
http://i68.tinypic.com/4uhugk.jpg
After seeing this first picture i take my words back. This must be a flexing diffuser / floor. Or they are justtrying to add more stifness to the end.
"Life is about passions - Thank you for sharing mine" MSC

User avatar
gandharva
252
Joined: 06 Feb 2012, 15:19
Location: Munich

Re: Red Bull RB15

Post

These two rods have been there since Melbourne.

User avatar
godlameroso
309
Joined: 16 Jan 2010, 21:27
Location: Miami FL

Re: Red Bull RB15

Post

yener wrote:
23 Apr 2019, 12:19
etusch wrote:
12 Apr 2019, 20:34
http://i68.tinypic.com/4uhugk.jpg
After seeing this first picture i take my words back. This must be a flexing diffuser / floor. Or they are justtrying to add more stifness to the end.
Or tuning the floor flex to work for them.
Saishū kōnā

User avatar
Morteza
2308
Joined: 10 Feb 2010, 18:23
Location: Bushehr, Iran

Re: Red Bull RB15

Post

Image

Image
Via AMuS
Last edited by Morteza on 25 Apr 2019, 19:53, edited 1 time in total.
"A fool thinks himself to be wise, but a wise man knows himself to be a fool."~William Shakespeare

michl420
michl420
19
Joined: 18 Apr 2010, 17:08
Location: Austria

Re: Red Bull RB15

Post

The red bull intercooler installation fascinates me again and again. The air supply bends by more than 90 degrees!

User avatar
HPD
198
Joined: 30 Jun 2016, 16:06

Re: Red Bull RB15

Post

Image

@Amus

User avatar
gandharva
252
Joined: 06 Feb 2012, 15:19
Location: Munich

Re: Red Bull RB15

Post

Slightly different frontwing in the background.