Building an F1 Honda BAR003 chassis up - on a budget

Post here information about your own engineering projects, including but not limited to building your own car or designing a virtual car through CAD.
showcar
3
Joined: 21 Dec 2011, 23:42
Contact:

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

Another busy weekend,
This weekend I drove to the South West and met up with Dan who has supplied quite a few parts.
I have now added a set of drive shafts
http://www.flickr.com/photos/73092712@N ... hotostream
http://www.flickr.com/photos/73092712@N ... otostream/
Managed to buy my first wheel centre, these seem hard to find
http://www.flickr.com/photos/73092712@N ... otostream/
And the gearbox entrance with bearings intact (not sure of it official name)
http://www.flickr.com/photos/73092712@N ... otostream/
Plus a camera mount plate
http://www.flickr.com/photos/73092712@N ... otostream/
Thanks Dan, really appreciate the help

User avatar
N12ck
11
Joined: 19 Dec 2010, 19:10

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

showcar wrote:Another busy weekend,
This weekend I drove to the South West and met up with Dan who has supplied quite a few parts.
I have now added a set of drive shafts
http://www.flickr.com/photos/73092712@N ... hotostream
http://www.flickr.com/photos/73092712@N ... otostream/
Managed to buy my first wheel centre, these seem hard to find
http://www.flickr.com/photos/73092712@N ... otostream/
And the gearbox entrance with bearings intact (not sure of it official name)
http://www.flickr.com/photos/73092712@N ... otostream/
Plus a camera mount plate
http://www.flickr.com/photos/73092712@N ... otostream/
Thanks Dan, really appreciate the help
Brilliant work, Hats off to you!

=D>
Budding F1 Engineer

showcar
3
Joined: 21 Dec 2011, 23:42
Contact:

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

Then I drove to see Bjorn with his fantastic RA107. I have seen the pictures and all I can say is "wow". It is without doubt a fantasic and beautiful car and its good to meet someone, with his wife, who are on a mission to make the car run again. Great couple too.
I then managed to secure a set of travel tyres from Bjorn, again thanks
http://www.flickr.com/photos/73092712@N ... otostream/
And on top Bjorn kindly gave me a tip for my damaged BAR nose.

http://www.flickr.com/photos/73092712@N ... otostream/Thanks and really appreciated Bjorn.

Thats me for now.

showcar
3
Joined: 21 Dec 2011, 23:42
Contact:

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

The post man delivered some Livelock fasteners today. These are mainly for bodywork and can retail at £30 each. These are all used but perfectly good.
http://www.flickr.com/photos/73092712@N ... hotostream

And a signed pictures of Olivier Panis in a similar spec BAR but this one looks like it was taken at Silverstone
http://www.flickr.com/photos/73092712@N ... otostream/

User avatar
zoro_f1
-2
Joined: 02 Feb 2012, 08:24

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

nice. :)

Image
Image “The force can have a strong influence on the weak-minded”: [Obi Wan Kenobi]

showcar
3
Joined: 21 Dec 2011, 23:42
Contact:

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

Getting ready for next weekend where I start bolting the chassis together thus one step nearer to rolling.
I have a good collection of the relevant bolts etc but for those who do not know
Bodywork fasterners look like this
http://www.flickr.com/photos/73092712@N ... hotostream
These are bolted into receivers that are built into the carbon bodywork
http://www.flickr.com/photos/73092712@N ... otostream/

a few more of the required nuts and bolts
http://www.flickr.com/photos/73092712@N ... otostream/

bhall
244
Joined: 28 Feb 2006, 21:26

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

How much do those tires weigh?

showcar
3
Joined: 21 Dec 2011, 23:42
Contact:

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

Hi bhallg2k The front ones weigh in at around 6kgs. Hope that helps?

This week I have also tracked down and purchased a universal steering column joint from a Honda
http://www.flickr.com/photos/73092712@N ... hotostream

Henning
0
Joined: 17 Oct 2007, 15:02
Location: Kent, England
Contact:

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

showcar wrote:Hi bhallg2k The front ones weigh in at around 6kgs. Hope that helps?

This week I have also tracked down and purchased a universal steering column joint from a Honda
http://www.flickr.com/photos/73092712@N ... hotostream
That looks like steel. I would have expected a more exotic material. Is there a reason to do with the loads it needs to sustain?

EAKMotorsports
0
Joined: 31 Jan 2007, 07:17

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

looking forward.
*´¨)
¸.·´¸.·*´¨) ¸.·*¨)
(¸.·´ (¸.·` * EAK

showcar
3
Joined: 21 Dec 2011, 23:42
Contact:

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

Hi Henning,
you are right that is a steel component. It was from a show car and as planned I will use certain parts to build my project into a roller. At that point I will start an even harder challenge, like F1snake and start investigating how I need to upgrade certain parts to run it. The steering rack and certain elements of suspension will need to be upgraded at that point.
As mentioned its not a quick win but a long term goal to have this chassis running again, all be it with a slightly cheaper engine and more affordable gearbox plus consumables such as break pads, tyres etc
Hope that helps

showcar
3
Joined: 21 Dec 2011, 23:42
Contact:

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

Have been building up the gearbox today
http://www.flickr.com/photos/73092712@N ... hotostream
Last edited by mx_tifoso on 20 May 2012, 01:26, edited 1 time in total.
Reason: removed url tags.

iceracer
0
Joined: 17 Oct 2010, 10:01
Location: sweden

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

very good!-keep up moving, n soon you roll ! :)

showcar
3
Joined: 21 Dec 2011, 23:42
Contact:

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

Thanks to all the positive messages but it looks like the project will now no longer be as the temptation became too much and I have purchased a full F1 roller. More details to follow and pictures on another thread once its here and I have the chance.
Although this project was hard it was not out of the reach of anyone so by all means take up the challenge and build one yourself and beat my progress.
Many thanks

User avatar
N12ck
11
Joined: 19 Dec 2010, 19:10

Re: Building an F1 Honda BAR003 chassis up - on a budget

Post

you could always continue and have 2 f1 rolling chassis' ?
Budding F1 Engineer