Honda Power Unit Hardware & Software

All that has to do with the power train, gearbox, clutch, fuels and lubricants, etc. Generally the mechanical side of Formula One.
N21
N21
3
Joined: Thu Feb 25, 2021 12:17 pm

Re: Honda Power Unit Hardware & Software

Post

Does anyone know to what extent Max’ 2nd engine can be serviced / repaired by Honda? Is the complete PU sealed or can it be serviced? Apart from the possible obvious component swaps and their respective grid penalties

User avatar
Wouter
603
Joined: Sat Dec 16, 2017 12:02 pm

Re: Honda Power Unit Hardware & Software

Post

I deleted this post.
Last edited by Wouter on Thu Jul 22, 2021 4:17 pm, edited 1 time in total.

Hoffman900
Hoffman900
45
Joined: Sun Oct 13, 2019 2:02 am

Re: Honda Power Unit Hardware & Software

Post

There is enough data set over the course of all the races to do what I am asking.

It could even be the last generation for that matter.

I’m more interested in the shape of the curve than absolute units of these engines as oppose to the pre-hybrid era engines.

User avatar
Wouter
603
Joined: Sat Dec 16, 2017 12:02 pm

Re: Honda Power Unit Hardware & Software

Post

N21 wrote:
Thu Jul 22, 2021 4:06 pm
Does anyone know to what extent Max’ 2nd engine can be serviced / repaired by Honda? Is the complete PU sealed or can it be serviced? Apart from the possible obvious component swaps and their respective grid penalties
The damaged PU is currently in Sakura, to see if parts can still be used. It will be assessed whether a new 3rd PU will have to be used or whether it can be reasonably repaired.

N21
N21
3
Joined: Thu Feb 25, 2021 12:17 pm

Re: Honda Power Unit Hardware & Software

Post

Wouter wrote:
Thu Jul 22, 2021 4:16 pm
N21 wrote:
Thu Jul 22, 2021 4:06 pm
Does anyone know to what extent Max’ 2nd engine can be serviced / repaired by Honda? Is the complete PU sealed or can it be serviced? Apart from the possible obvious component swaps and their respective grid penalties
The damaged PU is currently in Sakura, to see if parts can still be used. It will be assessed whether a new 3rd PU will have to be used or whether it can be reasonably repaired.
Yup I know, but to what extent are Honda allowed to repair or service certain parts? Can they fit a new crankshaft, camshafts or pistons for example?

dans79
dans79
383
Joined: Sun Mar 03, 2013 6:33 pm
Location: USA

Re: Honda Power Unit Hardware & Software

Post

N21 wrote:
Thu Jul 22, 2021 4:50 pm
Wouter wrote:
Thu Jul 22, 2021 4:16 pm
N21 wrote:
Thu Jul 22, 2021 4:06 pm
Does anyone know to what extent Max’ 2nd engine can be serviced / repaired by Honda? Is the complete PU sealed or can it be serviced? Apart from the possible obvious component swaps and their respective grid penalties
The damaged PU is currently in Sakura, to see if parts can still be used. It will be assessed whether a new 3rd PU will have to be used or whether it can be reasonably repaired.
Yup I know, but to what extent are Honda allowed to repair or service certain parts? Can they fit a new crankshaft, camshafts or pistons for example?
No, they can't change any of those components. If any of those are damaged then Max has to take a new ICE!
173 101 99 7

User avatar
Wouter
603
Joined: Sat Dec 16, 2017 12:02 pm

Re: Honda Power Unit Hardware & Software

Post

N21 wrote:
Thu Jul 22, 2021 4:50 pm
Wouter wrote:
Thu Jul 22, 2021 4:16 pm
N21 wrote:
Thu Jul 22, 2021 4:06 pm
Does anyone know to what extent Max’ 2nd engine can be serviced / repaired by Honda? Is the complete PU sealed or can it be serviced? Apart from the possible obvious component swaps and their respective grid penalties
The damaged PU is currently in Sakura, to see if parts can still be used. It will be assessed whether a new 3rd PU will have to be used or whether it can be reasonably repaired.
Yup I know, but to what extent are Honda allowed to repair or service certain parts? Can they fit a new crankshaft, camshafts or pistons for example?
I don't know exactly which parts can be repaired, but Yamamoto was hoping they could fix parts so they wouldn't have to use a new PU. So some parts are allowed to fix.

User avatar
ispano6
323
Joined: Thu Mar 09, 2017 10:56 pm
Location: my playseat

Re: Honda Power Unit Hardware & Software

Post

Hoffman900 wrote:
Thu Jul 22, 2021 2:04 pm
ispano6 wrote:
Thu Jul 22, 2021 10:47 am
This is the Honda engine thread, please discuss all thing Mercedes in the Mercedes PU thread
It was answering the question on why the Honda looked down relative to the Mercedes, compared to how it’s look previously. :roll:
Yeah but you didn't answer the question if whether or not the power was turned up or down. Your answer was about the car.

User avatar
bigblue
41
Joined: Wed Oct 01, 2014 11:18 am

Re: Honda Power Unit Hardware & Software

Post

Wouter wrote:
Thu Jul 22, 2021 5:22 pm
N21 wrote:
Thu Jul 22, 2021 4:50 pm
Wouter wrote:
Thu Jul 22, 2021 4:16 pm


The damaged PU is currently in Sakura, to see if parts can still be used. It will be assessed whether a new 3rd PU will have to be used or whether it can be reasonably repaired.
Yup I know, but to what extent are Honda allowed to repair or service certain parts? Can they fit a new crankshaft, camshafts or pistons for example?
I don't know exactly which parts can be repaired, but Yamamoto was hoping they could fix parts so they wouldn't have to use a new PU. So some parts are allowed to fix.
I suppose they could canabalise a previous engine to get some parts, but no idea which, if any, parts are usable from an engine that has done it's intended life. Not many I'd guess, but that is a complete guess.

Hoffman900
Hoffman900
45
Joined: Sun Oct 13, 2019 2:02 am

Re: Honda Power Unit Hardware & Software

Post

ispano6 wrote:
Thu Jul 22, 2021 10:49 pm
Hoffman900 wrote:
Thu Jul 22, 2021 2:04 pm
ispano6 wrote:
Thu Jul 22, 2021 10:47 am
This is the Honda engine thread, please discuss all thing Mercedes in the Mercedes PU thread
It was answering the question on why the Honda looked down relative to the Mercedes, compared to how it’s look previously. :roll:
Yeah but you didn't answer the question if whether or not the power was turned up or down. Your answer was about the car.
Short of using GPS data, which requires knowing all sorts of other metrics (good luck), you can’t say for sure unless you compare it against its competition.

We don’t have access to engine dynos.

The other problem is the power curve looks nothing like a naturally aspirated or a turbo ic engine where the turbo isn’t decoupled from exhaust speed. Hence my follow up question if anyone has attempted to plot power graphs of these engines?

User avatar
ispano6
323
Joined: Thu Mar 09, 2017 10:56 pm
Location: my playseat

Re: Honda Power Unit Hardware & Software

Post

bigblue wrote:
Thu Jul 22, 2021 11:00 pm
Wouter wrote:
Thu Jul 22, 2021 5:22 pm
N21 wrote:
Thu Jul 22, 2021 4:50 pm


Yup I know, but to what extent are Honda allowed to repair or service certain parts? Can they fit a new crankshaft, camshafts or pistons for example?
I don't know exactly which parts can be repaired, but Yamamoto was hoping they could fix parts so they wouldn't have to use a new PU. So some parts are allowed to fix.
I suppose they could canabalise a previous engine to get some parts, but no idea which, if any, parts are usable from an engine that has done it's intended life. Not many I'd guess, but that is a complete guess.
Actually Yamamoto said they could be running the 1st PU or the 2nd in Hungary for Verstappen depending on the damage assessment. Hungary isn't a power-sensitive track so they won't need to run the engine hard, and Max has been winning races with the power turned down on many occasions. The strength of the Honda PU is it's reliability and longevity, something that their plating had allowed them even toward the end of last year, as they had expected. As long as the PU checks out and is anomaly free in FP, it can be race worthy. Since there obviously was no performance upgrades for PU2 the first PU can be run optimally and win races. If PU2 is unfit to race, they can always introduce PU3 and use it sparingly. And if PU4 has to be introduced, then they can fully send it with that one.

Hoffman900
Hoffman900
45
Joined: Sun Oct 13, 2019 2:02 am

Re: Honda Power Unit Hardware & Software

Post

Does anyone know or have an idea of how crankshaft thrust is controlled in these engines?

That’s where I’ve seen failures from hard shunts, including a counterweight into a bulkhead after the thrust plate shattered.

The other obvious place on these engines will be the block / cylinder due to being structural members. Worst case the block flexes or cam towers flex while everything is still spinning.

User avatar
Wouter
603
Joined: Sat Dec 16, 2017 12:02 pm

Re: Honda Power Unit Hardware & Software

Post

Hoffman900 wrote:
Thu Jul 22, 2021 11:47 pm
Does anyone know or have an idea of how crankshaft thrust is controlled in these engines?

That’s where I’ve seen failures from hard shunts, including a counterweight into a bulkhead after the thrust plate shattered.

The other obvious place on these engines will be the block / cylinder due to being structural members. Worst case the block flexes or cam towers flex while everything is still spinning.
Maybe better asking in the Mercedes Power Unit Hardware & Software topic.
There are a lot of people with a huge knowledge about engines.

User avatar
godlameroso
516
Joined: Sat Jan 16, 2010 8:27 pm
Location: Miami FL

Re: Honda Power Unit Hardware & Software

Post

Hoffman900 wrote:
Thu Jul 22, 2021 11:47 pm
Does anyone know or have an idea of how crankshaft thrust is controlled in these engines?

That’s where I’ve seen failures from hard shunts, including a counterweight into a bulkhead after the thrust plate shattered.

The other obvious place on these engines will be the block / cylinder due to being structural members. Worst case the block flexes or cam towers flex while everything is still spinning.
Same way it's controlled in most engines. Thrust bearings. The block itself is likely fine. All the stuff around it is not, we'll know by Monday. Us readers that is.
Saishū kōnā

PhillipM
PhillipM
423
Joined: Mon May 16, 2011 2:18 pm
Location: Over the road from Boothy...

Re: Honda Power Unit Hardware & Software

Post

I would imagine the block is probably okay, given they're pretty tough for taking loadings anyway, but it's whether it's nipped the crank or cams in the impact, and how much damage there is to any of the castings that attach the MGU-H, turbo pipes, loom, etc. Guess we'll find out but I wouldn't be surprised if they wrote it mainly off.