Honda Power Unit Hardware & Software

All that has to do with the power train, gearbox, clutch, fuels and lubricants, etc. Generally the mechanical side of Formula One.
User avatar
Wouter
106
Joined: 16 Dec 2017, 13:02

Re: Honda Power Unit Hardware & Software

Post

godlameroso wrote:
30 Sep 2019, 15:11
Mudflap wrote:
30 Sep 2019, 11:38
godlameroso wrote:
30 Sep 2019, 01:05
Yes they did. We'll see next round.
.
You said the new fuel worked fine in Singapore then you said there is new fuel in Japan?
.
I said they brought fuel, whether it was used at any point, I don't know. Could have been on one or two cars, could have been used only in practice and not raced.
There was NO new fuel in Singapore. It was not ready.

David Tsurusaki from ExxonMobil (Global Motorsport Technology Manager) confirmed this.

So according to you he is lying??
The Power of Dreams!

User avatar
Sieper
73
Joined: 14 Mar 2017, 15:19

Re: Honda Power Unit Hardware & Software

Post

May I say something very stupid?

I am doing it all the time so why not once more :)

Isn't the fuel story just marketing?

I once (years ago) read the Mercedes materials surrounding their engine and how they developed it. They stated they design it all in house and the whole concept is thought of and engineered by a team. That included the fuels and the lubricants. If they make an improvement to the ICE then all aspects are involved. I do believe it straight away that if you can have a fuel that (even if just slightly) can prevent (make margins of unpredictability smaller) any premature exploding of the mixture that really helps total power output. But it sounds also totally logical that the same team that design the combustion process also tailors the fuel to need. So the MERC AMG engine team, not anybody in Malaysia at Petronas. They just pay an (enormous) amount to be sponsor and then every once in a while Mercedes communicates that thanks to the good guys at Petronas we can now have x HP more, great fuels by a great company, thank you! so much!

Now, don't all engine builders do the same? Ferrari with Shell, RBR/Honda with Esso Mobil and Renault with BP (and Castrol for lubricants).

So isn't this whole "bringing new fuel" actually a marketing story, it is just the team of engineers who developed a total concept that should allow X number of HP and it is just a decision/dare to use it close to the limit. of course the fuel is part of it but it is not like Esso engineers have been developing that somewhere in (where are they even?) their research department but just by the HRD team in Sakura. Perhaps assisted by, if those fuel companies actually have those kind of engineers?

If the engine blows it is Honda who suffers. So it will be Honda who needs to oversee.

User avatar
godlameroso
309
Joined: 16 Jan 2010, 21:27
Location: Miami FL

Re: Honda Power Unit Hardware & Software

Post

Wouter wrote:
30 Sep 2019, 15:33
godlameroso wrote:
30 Sep 2019, 15:11
Mudflap wrote:
30 Sep 2019, 11:38

.
You said the new fuel worked fine in Singapore then you said there is new fuel in Japan?
.
I said they brought fuel, whether it was used at any point, I don't know. Could have been on one or two cars, could have been used only in practice and not raced.
There was NO new fuel in Singapore. It was not ready.

David Tsurusaki from ExxonMobil (Global Motorsport Technology Manager) confirmed this.

So according to you he is lying??
Lying, no, that's a harsh way of looking at it. There was fuel brought to Singapore, it is not the fuel that will be used in Suzuka. It was similar to the fuel used since the summer break, I know for a fact there was some validation testing going on since Singapore. Part of it having to do with Kvyat's many engine changes. He's on his 3rd spec 4 full PU.
Saishū kōnā

User avatar
Sieper
73
Joined: 14 Mar 2017, 15:19

Re: Honda Power Unit Hardware & Software

Post

godlameroso wrote:
30 Sep 2019, 16:09
Wouter wrote:
30 Sep 2019, 15:33
godlameroso wrote:
30 Sep 2019, 15:11

.
I said they brought fuel, whether it was used at any point, I don't know. Could have been on one or two cars, could have been used only in practice and not raced.
There was NO new fuel in Singapore. It was not ready.

David Tsurusaki from ExxonMobil (Global Motorsport Technology Manager) confirmed this.

So according to you he is lying??
Lying, no, that's a harsh way of looking at it. There was fuel brought to Singapore, it is not the fuel that will be used in Suzuka. It was similar to the fuel used since the summer break, I know for a fact there was some validation testing going on since Singapore. Part of it having to do with Kvyat's many engine changes. He's on his 3rd spec 4 full PU.
The KVYAT engine malfunction has had me very worried. I was already expecting he was being used as the Guinea pig (or as we say here, "the test rabbit"). The fact that Max was so optimistic on Friday (cheeky, happy) and that on Saturday (after the KVYAT engine shut down) and ofcourse Max himselve only being able to go P4 and being suddenly so downbeat, contributed to that feeling enormously. Hope that that was not a gaint setback.

User avatar
godlameroso
309
Joined: 16 Jan 2010, 21:27
Location: Miami FL

Re: Honda Power Unit Hardware & Software

Post

Sieper wrote:
30 Sep 2019, 15:55
May I say something very stupid?

I am doing it all the time so why not once more :)

Isn't the fuel story just marketing?

I once (years ago) read the Mercedes materials surrounding their engine and how they developed it. They stated they design it all in house and the whole concept is thought of and engineered by a team. That included the fuels and the lubricants. If they make an improvement to the ICE then all aspects are involved. I do believe it straight away that if you can have a fuel that (even if just slightly) can prevent (make margins of unpredictability smaller) any premature exploding of the mixture that really helps total power output. But it sounds also totally logical that the same team that design the combustion process also tailors the fuel to need. So the MERC AMG engine team, not anybody in Malaysia at Petronas. They just pay an (enormous) amount to be sponsor and then every once in a while Mercedes communicates that thanks to the good guys at Petronas we can now have x HP more, great fuels by a great company, thank you! so much!

Now, don't all engine builders do the same? Ferrari with Shell, RBR/Honda with Esso Mobil and Renault with BP (and Castrol for lubricants).

So isn't this whole "bringing new fuel" actually a marketing story, it is just the team of engineers who developed a total concept that should allow X number of HP and it is just a decision/dare to use it close to the limit. of course the fuel is part of it but it is not like Esso engineers have been developing that somewhere in (where are they even?) their research department but just by the HRD team in Sakura. Perhaps assisted by, if those fuel companies actually have those kind of engineers?

If the engine blows it is Honda who suffers. So it will be Honda who needs to oversee.
The type of combustion modeling needed to improve the combustion concept itself is beyond the budget and scope of any of the engine manufacturers. Only large petrochemical companies have the supercomputers, and staff needed to make the advances. Not only do they tailor the fuel to the power units, but they also help develop they power units themselves, particularly the combustion side. Combustion reactions happen in micro and nano second time scales, the fuel providers have equipment that can work in those time scales. Manufacturers work on thermodynamics side, which is cake compared to fuel chemical kinetics.

If you get the fuel kinetics right it is a HUGE advantage. Ferrari's engine is proof of this.
Saishū kōnā

NL_Fer
NL_Fer
82
Joined: 15 Jun 2014, 09:48

Re: Honda Power Unit Hardware & Software

Post

Sieper wrote:
30 Sep 2019, 15:55
May I say something very stupid?

I am doing it all the time so why not once more :)

Isn't the fuel story just marketing?

I once (years ago) read the Mercedes materials surrounding their engine and how they developed it. They stated they design it all in house and the whole concept is thought of and engineered by a team. That included the fuels and the lubricants. If they make an improvement to the ICE then all aspects are involved. I do believe it straight away that if you can have a fuel that (even if just slightly) can prevent (make margins of unpredictability smaller) any premature exploding of the mixture that really helps total power output. But it sounds also totally logical that the same team that design the combustion process also tailors the fuel to need. So the MERC AMG engine team, not anybody in Malaysia at Petronas. They just pay an (enormous) amount to be sponsor and then every once in a while Mercedes communicates that thanks to the good guys at Petronas we can now have x HP more, great fuels by a great company, thank you! so much!

Now, don't all engine builders do the same? Ferrari with Shell, RBR/Honda with Esso Mobil and Renault with BP (and Castrol for lubricants).

So isn't this whole "bringing new fuel" actually a marketing story, it is just the team of engineers who developed a total concept that should allow X number of HP and it is just a decision/dare to use it close to the limit. of course the fuel is part of it but it is not like Esso engineers have been developing that somewhere in (where are they even?) their research department but just by the HRD team in Sakura. Perhaps assisted by, if those fuel companies actually have those kind of engineers?

If the engine blows it is Honda who suffers. So it will be Honda who needs to oversee.
These oil companies have allot of chemical experience and combustion knowledge. They also have a very big pool of skilled personel, to draw their F1 specialists from.

Yes the F1 fuels and lubricant teams are made by special teams, close to the engine teams and probably located in Germany, Italy, France, Japan and the UK and probably Petronas hired, Shell Italians, etc... But they are still employed by the fuel supplier.

User avatar
godlameroso
309
Joined: 16 Jan 2010, 21:27
Location: Miami FL

Re: Honda Power Unit Hardware & Software

Post

NL_Fer wrote:
30 Sep 2019, 19:28
Sieper wrote:
30 Sep 2019, 15:55
May I say something very stupid?

I am doing it all the time so why not once more :)

Isn't the fuel story just marketing?

I once (years ago) read the Mercedes materials surrounding their engine and how they developed it. They stated they design it all in house and the whole concept is thought of and engineered by a team. That included the fuels and the lubricants. If they make an improvement to the ICE then all aspects are involved. I do believe it straight away that if you can have a fuel that (even if just slightly) can prevent (make margins of unpredictability smaller) any premature exploding of the mixture that really helps total power output. But it sounds also totally logical that the same team that design the combustion process also tailors the fuel to need. So the MERC AMG engine team, not anybody in Malaysia at Petronas. They just pay an (enormous) amount to be sponsor and then every once in a while Mercedes communicates that thanks to the good guys at Petronas we can now have x HP more, great fuels by a great company, thank you! so much!

Now, don't all engine builders do the same? Ferrari with Shell, RBR/Honda with Esso Mobil and Renault with BP (and Castrol for lubricants).

So isn't this whole "bringing new fuel" actually a marketing story, it is just the team of engineers who developed a total concept that should allow X number of HP and it is just a decision/dare to use it close to the limit. of course the fuel is part of it but it is not like Esso engineers have been developing that somewhere in (where are they even?) their research department but just by the HRD team in Sakura. Perhaps assisted by, if those fuel companies actually have those kind of engineers?

If the engine blows it is Honda who suffers. So it will be Honda who needs to oversee.
These oil companies have allot of chemical experience and combustion knowledge. They also have a very big pool of skilled personel, to draw their F1 specialists from.

Yes the F1 fuels and lubricant teams are made by special teams, close to the engine teams and probably located in Germany, Italy, France, Japan and the UK and probably Petronas hired, Shell Italians, etc... But they are still employed by the fuel supplier.
You also have to take into consideration the resources available to these petrochemical companies. The world revolves around energy they provide through fuel, billions of tons of fuel are sold daily and they get a cut. They have massive manufacturing capacities, they have the latest cutting edge super computers at their disposal for research they're already doing. Esso made a net profit on the books of $20 billion+ after $279 billion in revenue(Double that of Daimler AG). The biggest budget in F1 maybe reaches 1 billion with the engine and chassis team + support staff combined, over 2 years.
Saishū kōnā

User avatar
Sieper
73
Joined: 14 Mar 2017, 15:19

Re: Honda Power Unit Hardware & Software

Post

Thanks for your answers guys. It seems I was underestimating the actual involvement of the oil companies.

Hkbruin2
Hkbruin2
4
Joined: 26 Jan 2019, 05:49

Re: Honda Power Unit Hardware & Software

Post


User avatar
hollus
Moderator
Joined: 29 Mar 2009, 01:21
Location: Copenhagen, Denmark

Re: Honda Power Unit Hardware & Software

Post

4 pages on (interesting) possible ways to cheat on the flow sensor have been moved to their own topic as they were not specific to this Honda PU.
Find it here:
Any sensible ways to cheat the flow sensors?


Posts on topic are specially appreciated in the PU threads.
Rivals, not enemies.

aleshondas
aleshondas
0
Joined: 14 Sep 2017, 09:15

Re: Honda Power Unit Hardware & Software

Post

Is there any way that Honda can copy some things from Moto gp??

wuzak
wuzak
445
Joined: 30 Aug 2011, 03:26

Re: Honda Power Unit Hardware & Software

Post

aleshondas wrote:
05 Oct 2019, 22:28
Is there any way that Honda can copy some things from Moto gp??
Like what?

aleshondas
aleshondas
0
Joined: 14 Sep 2017, 09:15

Re: Honda Power Unit Hardware & Software

Post

Combustion process?? I yust asked

restless
restless
18
Joined: 10 May 2016, 09:12

Re: Honda Power Unit Hardware & Software

Post

Pretty sure combustion process for F1 is way more sophisticated

wuzak
wuzak
445
Joined: 30 Aug 2011, 03:26

Re: Honda Power Unit Hardware & Software

Post

restless wrote:
07 Oct 2019, 11:42
Pretty sure combustion process for F1 is way more sophisticated
Agreed.

MotoGP's combustion is probably more like the V8 and V10 eras of F1 than the current engines.