RBR Steering wheel 3D (dimensions?)

All that has to do with the power train, gearbox, clutch, fuels and lubricants, etc. Generally the mechanical side of Formula One.
stevegek
0
Joined: Sat Jul 31, 2004 10:03 pm
Location: Netherlands

RBR Steering wheel 3D (dimensions?)

Post by stevegek » Wed May 23, 2018 2:26 pm

Hey guys, doing a 3D model of the RBR's (13) steering wheel. It's a bit of an interpretation but printed it will look nice at my wall. :)

The question is... how wide is it?

Image
Meep - Meep.

JonoNic
11
User avatar
Joined: Thu Mar 05, 2015 2:54 pm

Re: RBR Steering wheel 3D (dimensions?)

Post by JonoNic » Wed May 23, 2018 3:59 pm

stevegek wrote:Hey guys, doing a 3D model of the RBR's (13) steering wheel. It's a bit of an interpretation but printed it will look nice at my wall. :)

The question is... how wide is it?

Image
The width should suite the individual driver's hand... So use your hand as a guide
Always find the gap then use it.

jjn9128
209
User avatar
Joined: Tue May 02, 2017 10:53 pm

Re: RBR Steering wheel 3D (dimensions?)

Post by jjn9128 » Wed May 23, 2018 4:08 pm

The display is a standard McLaren electronics component - try google and look for a spec sheet!
#aerogandalf

Noetiepoerker26
1
User avatar
Joined: Wed Mar 29, 2017 6:21 pm

Re: RBR Steering wheel 3D (dimensions?)

Post by Noetiepoerker26 » Wed May 23, 2018 5:50 pm

Or perhaps send an e-mail to RBR?
Two stroke: a little more than half the power, twice as often.

stevegek
0
Joined: Sat Jul 31, 2004 10:03 pm
Location: Netherlands

Re: RBR Steering wheel 3D (dimensions?)

Post by stevegek » Wed May 23, 2018 9:29 pm

Okay, if I say 28cm wide, is that crazy big or small? I hold one but that was 2007... been a while. I did a test print with only the outlines and it looks kinda big at 28 cm wide.

I could send RBR a line, but I want to start printing tomorrow hehe.
Meep - Meep.

stevegek
0
Joined: Sat Jul 31, 2004 10:03 pm
Location: Netherlands

Re: RBR Steering wheel 3D (dimensions?)

Post by stevegek » Wed May 23, 2018 11:22 pm

Some progress on the 3D model. Some minor issues to fix, and a lot of details and stuff to add. Handgrips are a first itteration.

Image
Meep - Meep.