modbaraban wrote:Most cars were bottoming there (and elsewhere too).
3.13.2 Fasteners used to attach the skid block to the car must :
a) have a total area no greater than 40000mm² when viewed from directly beneath the car ;
b) be no greater than 2000mm² in area individually when viewed from directly beneath the car ;
c) be fitted in order that their entire lower surfaces are visible from directly beneath the car.
When the skid block is new, ten of the fasteners may be flush with its lower surface but the remainder may be no more than 8mm below the reference plane.
zac510 wrote:Again you should read the rules and you'll see some flexibility with regard to the wear.
Users browsing this forum: Google [Bot] and 11 guests