A shameless image thread for the enginephiles

All that has to do with the power train, gearbox, clutch, fuels and lubricants, etc. Generally the mechanical side of Formula One.
xpensive
xpensive
214
Joined: 22 Nov 2008, 18:06
Location: Somewhere in Scandinavia

Re: A shameless image thread for the enginephiles

Post

A Volvo 164 with a Jaguar V12 engine!

Image
"I spent most of my money on wine and women...I wasted the rest"


Tommy Cookers
Tommy Cookers
621
Joined: 17 Feb 2012, 16:55

Re: A shameless image thread for the enginephiles

Post

sprinkle a few turbochargers around and you have your 2000 bhp hypercar engine, otherwise only 900 (if derating etc cancelled)
I had one

User avatar
flynfrog
Moderator
Joined: 23 Mar 2006, 22:31

Re: A shameless image thread for the enginephiles

Post

http://www.roadandtrack.com/car-videos/ ... =soc_fcbks

The beast of Turin Lives!

http://vimeo.com/113158655


OLd silent movie of it making a pass

J.A.W.
J.A.W.
109
Joined: 01 Sep 2014, 05:10
Location: Altair IV.

Re: A shameless image thread for the enginephiles

Post

Tommy Cookers wrote:sprinkle a few turbochargers around and you have your 2000 bhp hypercar engine, otherwise only 900 (if derating etc cancelled)
I had one
& what manner of trans to handle the massive torque/ short rpm range T-C?
An Allison multi-speed auto?

Centurion tanks thusly powered but with awful manual gearboxes gave 'agricultural' - a bad name..
"Well, we knocked the bastard off!"

Ed Hilary on being 1st to top Mt Everest,
(& 1st to do a surface traverse across Antarctica,
in good Kiwi style - riding a Massey Ferguson farm
tractor - with a few extemporised mod's to hack the task).

User avatar
1158
39
Joined: 06 Mar 2012, 05:48

Re: A shameless image thread for the enginephiles

Post

Love that they finally got this running! Everything about this engine is ridiculous!

Gigantic conrods? Check.
Image

Gigantic pistons? Check.
Image

Oversize Gudgeon/Wrist Pin? Check.
Image

Amazing that this car was driven to 137 mph! Talk about having large stones!

Edit: In my reading about this marvelous beast I found that claimed horsepower was 300 at 1800RPM. I read someone who stated torque was around 2000 ft/lb but using the simple hp/torque relationship I found peak torque would be right about 900 ft/lb. Peak torque and peak hp occur around the same rpm. Of course with this engine being quite unusual I'm not sure if the standard formula would apply, though I can't see why it shouldn't.

Any guess about idle rpm? I was thinking maybe 200 rpm.

Just_a_fan
Just_a_fan
591
Joined: 31 Jan 2010, 20:37

Re: A shameless image thread for the enginephiles

Post

andylaurence wrote:Meh! 27 litre Rolls Royce Meteor in a Rover SD1...
An F1 engineer friend of mine, who is now retired from F1, has two of these engines. He's very slowly putting one into a Phantom II chassis. If he ever gets it finished it will quite something.

Took the exhaust headers off one of the engines and he rigged up various drums for cooling, fuel etc. Ran it up in his back garden. By crikey it was loud!

But oh, the noise...

600bhp never sounded so good, not even the McLaren F1 which is probably the best sounding road car ever to my ears.
If you are more fortunate than others, build a larger table not a taller fence.

xpensive
xpensive
214
Joined: 22 Nov 2008, 18:06
Location: Somewhere in Scandinavia

Re: A shameless image thread for the enginephiles

Post

Image

Ii all began as an effort to challenge the Ford Coswort DFX with a home-gron 2.65 turbo V8 in 1984.

Image

Image

The engene ran indeed on the dyno, very well at that.

Image

But due to a lack of investors, read Roger Penske, the project collapsed. Below an atmo-version though.

Image
"I spent most of my money on wine and women...I wasted the rest"

User avatar
FW17
168
Joined: 06 Jan 2010, 10:56

Re: A shameless image thread for the enginephiles

Post

what is that small turbine in front of the engine for?

Just_a_fan
Just_a_fan
591
Joined: 31 Jan 2010, 20:37

Re: A shameless image thread for the enginephiles

Post

Water pump?
If you are more fortunate than others, build a larger table not a taller fence.

countersteer
countersteer
9
Joined: 28 Apr 2007, 14:37
Location: Spring Hill, TN

Re: A shameless image thread for the enginephiles

Post


xpensive
xpensive
214
Joined: 22 Nov 2008, 18:06
Location: Somewhere in Scandinavia

Re: A shameless image thread for the enginephiles

Post

countersteer wrote:Nice write up on the Callaway V-8.
http://www.enginelabs.com/engine-tech/e ... 00-engine/
So you found the source, congratulations to you then.
"I spent most of my money on wine and women...I wasted the rest"

nokivasara
nokivasara
2
Joined: 27 Nov 2014, 20:53

Re: A shameless image thread for the enginephiles

Post

1158 wrote:
Love that they finally got this running! Everything about this engine is ridiculous!

Gigantic conrods? Check.
https://scontent-a-atl.xx.fbcdn.net/hph ... e=551C4D0A

Gigantic pistons? Check.
https://scontent-b-atl.xx.fbcdn.net/hph ... e=55168103

Oversize Gudgeon/Wrist Pin? Check.
https://scontent-b-atl.xx.fbcdn.net/hph ... e=550AA86C

Amazing that this car was driven to 137 mph! Talk about having large stones!

Edit: In my reading about this marvelous beast I found that claimed horsepower was 300 at 1800RPM. I read someone who stated torque was around 2000 ft/lb but using the simple hp/torque relationship I found peak torque would be right about 900 ft/lb. Peak torque and peak hp occur around the same rpm. Of course with this engine being quite unusual I'm not sure if the standard formula would apply, though I can't see why it shouldn't.

Any guess about idle rpm? I was thinking maybe 200 rpm.
Amazing!! I nearly fell off my chair when the Beast fired up, it was like all hell broke loose, incredibly sinister sound :twisted:

I had to register to this forum just because of this thread, I've read through it all and enjoyed every single page =D>

User avatar
strad
117
Joined: 02 Jan 2010, 01:57

Re: A shameless image thread for the enginephiles

Post

I guess I'll never grow up..I want this for Christmas
https://www.youtube.com/watch?v=aZY-7SR4UCI
To achieve anything, you must be prepared to dabble on the boundary of disaster.”
Sir Stirling Moss

User avatar
djos
113
Joined: 19 May 2006, 06:09
Location: Melbourne, Australia

Re: A shameless image thread for the enginephiles

Post

Growing up is overrated!

I'm shocked they didn't at least double chock those front wheels tho! I'd have tied the Damn thing down myself.
"In downforce we trust"