Skip to content

Mercedes AMG F1 W11 EQ Performance

Team: Toto Wolff (Executive Director), James Allison (Technical Director), Andy Cowell (Executive Director of Mercedes AMG Powertrains), Aldo Costa (Technical advisor), Mike Elliot (Technology Director), Mark Ellis (PD), Geoffrey Willis (Director of Digital Engineering Transformation), Ron Meadows (SD), Andrew Shovlin (Trackside Engineering Director), Simon Cole (CTE), Matthew Deane (CM), Loic Serra (HVD), John Owen (CD), Ashley Way (DCD), Rob Thomas (COO), Loic Serra (Performance Director), Jarrod Murphy (HA), Eric Blandin (CA)
Drivers: Lewis Hamilton (44), Valtteri Bottas (77), Stoffel Vandoorne (reserve), Esteban Gutierrez (reserve)
Team name: Mercedes AMG F1 Petronas
Major partners: Petronas, Ineos, UBS, Epson, Bose, Tommy Hilfiger, IWS Schaffhausen, Hewlet Packard, Pure Storage, Crowdstrike, Tibco, AMD

More: 

Mercedes W11

A place to discuss the characteristics of the cars in Formula One, both current as well as historical. Laptimes, driver worshipping and team chatter do not belong here.
User avatar
PlatinumZealot
551
Joined: 12 Jun 2008, 03:45

Re: Mercedes W11

Post

According to James Allison the winter testing car was finalized before christmas and upgrades are seeing now were developed during the Spring months.

The DAS mechanism which added 2 kg of weight in first version is now much lighter.

Wider, now concave diffuser side walls.

Single rear wing pylon configuration selected. New rear wing slots.

New rear view mirror stalks

Revised S-duct?

New livery.

Anything else?
🖐️✌️☝️👀👌✍️🐎🏆🙏
Top
User avatar
Holm86
245
Joined: 10 Feb 2010, 03:37
Location: Copenhagen, Denmark

Re: Mercedes W11

Post

Blackout wrote: ↑
02 Jul 2020, 17:23
 https://i.imgur.com/8V2wNza.jpg
I knew modern F1 cars were too long, but this is stretching it too far :wink: :wink: :lol:
Top
User avatar
MtthsMlw
1033
Joined: 12 Jul 2017, 18:38
Location: Germany

Re: Mercedes W11

Post

Blackout wrote: ↑
02 Jul 2020, 17:23
 https://i.imgur.com/8V2wNza.jpg
The lenght of these cars is getting out of haaaaaaand.
Top
User avatar
Blackout
1563
Joined: 09 Feb 2010, 04:12

Re: Mercedes W11

Post

:lol:
Top
User avatar
PlatinumZealot
551
Joined: 12 Jun 2008, 03:45

Re: Mercedes W11

Post

Mercedes thought the new black livery would skillfuly hide the secret fuel bladders...
🖐️✌️☝️👀👌✍️🐎🏆🙏
Top
User avatar
MtthsMlw
1033
Joined: 12 Jul 2017, 18:38
Location: Germany

Re: Mercedes W11

Post

PlatinumZealot wrote: ↑
02 Jul 2020, 18:49
 According to James Allison the winter testing car was finalized before christmas and upgrades are seeing now were developed during the Spring months.

The DAS mechanism which added 2 kg of weight in first version is now much lighter.

Wider, now concave diffuser side walls.

Single rear wing pylon configuration selected. New rear wing slots.

New rear view mirror stalks

Revised S-duct?

New livery.

Anything else?
Front wheel hubs / brake ducts are slightly revised.
Testing
Austria
Top
zibby43
zibby43
613
Joined: 04 Mar 2017, 12:16

Re: Mercedes W11

Post

Morteza wrote: ↑
02 Jul 2020, 17:42
HungarianRacer wrote: ↑
02 Jul 2020, 15:14
 New rear wing endplates too (extended hanging vanes above the rear tyre):

https://i.imgur.com/eGqLzii.jpg

Old:

https://i.imgur.com/yJ3MFYJ.jpg
https://pbs.twimg.com/media/Eb7oqUFVAAY ... ame=medium
Is it a matter of perspective, or have the number of step cuts in the top of the end plate been altered as well?
Top
Dipesh1995
Dipesh1995
104
Joined: 21 Apr 2014, 17:11

Re: Mercedes W11

Post

Image
Top
HungarianRacer
HungarianRacer
35
Joined: 25 Jun 2019, 12:26

Re: Mercedes W11

Post

No strakes/spikes sticking out from under the front leading edge of the floor (behind the bargeboards)?.... I find that odd, definitely goes against modern design trends...
Top
zibby43
zibby43
613
Joined: 04 Mar 2017, 12:16

Re: Mercedes W11

Post

Good side-by-side comparison shot of both the rear wing and mirror stalk differences.

via @SomersF1 (Matthew Somerfield):

Image
Top
ENGINE TUNER
ENGINE TUNER
25
Joined: 29 Nov 2016, 18:07

Re: Mercedes W11

Post

HungarianRacer wrote: ↑
02 Jul 2020, 21:46
No strakes/spikes sticking out from under the front leading edge of the floor (behind the bargeboards)?.... I find that odd, definitely goes against modern design trends...
Maybe they weren't installed yet at that point. They would be a vulnerable part, so one that should be designed to be changed/removed/replaced easily, thus a part that would be placed on after the floor is affixed to the car.
Top
User avatar
nevill3
16
Joined: 11 Feb 2014, 21:31
Location: Monaco

Re: Mercedes W11

Post

HungarianRacer wrote: ↑
02 Jul 2020, 21:46
No strakes/spikes sticking out from under the front leading edge of the floor (behind the bargeboards)?.... I find that odd, definitely goes against modern design trends...
The image is of the top of the floor so you would not see any strakes etc.
Sent from my Commodore PET in 1978
Top
miguelalvesreis
miguelalvesreis
16
Joined: 12 May 2012, 13:38

Re: Mercedes W11

Post

The winglet on top of the suspension arm is also relocated, isn't it?

Enviado do meu SM-T820 através do Tapatalk

Top
User avatar
Morteza
2308
Joined: 10 Feb 2010, 18:23
Location: Bushehr, Iran

Re: Mercedes W11

Post

Image

Image
"A fool thinks himself to be wise, but a wise man knows himself to be a fool."~William Shakespeare
Top
Mansell89
Mansell89
12
Joined: 22 Feb 2015, 19:21

Re: Mercedes W11

Post

Image

Is that two slightly different iterations of the nose there for Bottas (the two front wings in the background)?

Looks like one slightly more raised at the tip than the other.
Top

Return to “F1 Car Hardware & Development”