McLaren MCL35M

A place to discuss the characteristics of the cars in Formula One, both current as well as historical. Laptimes, driver worshipping and team chatter do not belong here.
User avatar
PlatinumZealot
551
Joined: 12 Jun 2008, 03:45

Re: McLaren MCL35M

Post

Ground Effect wrote:
25 Mar 2021, 13:50
I remember in the AMuS interview with James Key that was posted on here, he was asked why the MCL35M didn’t have the bulge like the Mercedes and Aston Martin. He said they’d gone with a different philosophy, and he then said that’s all he’s going to say on the matter. Made me wonder if he felt McLaren had found something more efficient.
This is the answer why the buldge doesn't show:

The top central cooler is wide, so the plumbing leading to it take up space not allowing them to make the engine cover narrow.

If the top cooler were not there you can see how much narrower the top of the engine cover would be and how the buldge would show.

Image
Last edited by PlatinumZealot on 25 Mar 2021, 14:21, edited 1 time in total.
🖐️✌️☝️👀👌✍️🐎🏆🙏

101FlyingDutchman
101FlyingDutchman
15
Joined: 27 Feb 2019, 12:01

Re: McLaren MCL35M

Post

Clearly it’s been a compromise in a way: probably not being able to seat/engineer the PU down as far (pushing for a lower COG as they would have been able to do if it wasn’t for the limitation of token spend.
On the other hand they then went their own way based on their philosophy of being a higher rake car and keeping some of the architecture similar but benefitting from smaller side pods. A compromise that might actually really work considering this year floor change

User avatar
Blackout
1563
Joined: 09 Feb 2010, 04:12

Re: McLaren MCL35M

Post

101FlyingDutchman wrote:
25 Mar 2021, 14:19
Clearly it’s been a compromise in a way: probably not being able to seat/engineer the PU down as far (pushing for a lower COG as they would have been able to do if it wasn’t for the limitation of token spend.
On the other hand they then went their own way based on their philosophy of being a higher rake car and keeping some of the architecture similar but benefitting from smaller side pods. A compromise that might actually really work considering this year floor change
Tokens do not prevent them from changing and putting the centerline cooling system flat and low backwards like Mercedes, RP and Williams.
There are other reasons (ressources/time shortage, ballast shortage, this system works well, the aim to have the biggest undercut etc)

101FlyingDutchman
101FlyingDutchman
15
Joined: 27 Feb 2019, 12:01

Re: McLaren MCL35M

Post

Blackout wrote:
25 Mar 2021, 14:23
101FlyingDutchman wrote:
25 Mar 2021, 14:19
Clearly it’s been a compromise in a way: probably not being able to seat/engineer the PU down as far (pushing for a lower COG as they would have been able to do if it wasn’t for the limitation of token spend.
On the other hand they then went their own way based on their philosophy of being a higher rake car and keeping some of the architecture similar but benefitting from smaller side pods. A compromise that might actually really work considering this year floor change
Tokens do not prevent them from putting the centerline cooling system flat and low backwards like Mercedes, RP and Williams.
There are other reasons (ressources/time shortage, ballast shortage, this system works well etc)
Quite. But modifications to chassis and gearbox would incur token spend, which normally go hand in hand if you really have free reign (not just on where to put the CCS). And it would probably be impossible to convince the FIA of the need to do that the work

Mansell89
Mansell89
12
Joined: 22 Feb 2015, 19:21

Re: McLaren MCL35M

Post

So any likelihood of photos this morning or will it all be gained from FP1 later this afternoon?

Exciting times, always love a fresh season start!

kfrantzios
kfrantzios
46
Joined: 11 Mar 2017, 15:19
Location: Greece

Re: McLaren MCL35M

Post

Diffuser detail
Image
By Salvatore Asero

SmallSoldier
SmallSoldier
473
Joined: 10 Mar 2019, 03:54

Re: McLaren MCL35M

Post

Image


Sent from my iPad using Tapatalk

wowgr8
wowgr8
29
Joined: 11 Feb 2020, 20:35

Re: McLaren MCL35M

Post

Really really really impressive how tight the sidepod is right below the inlets when viewed head-on, the tightest of any car and by some distance

User avatar
mclaren111
272
Joined: 06 Apr 2014, 10:49
Location: Shithole - South Africa

Re: McLaren MCL35M

Post

wowgr8 wrote:
26 Mar 2021, 16:21
Really really really impressive how tight the sidepod is right below the inlets when viewed head-on, the tightest of any car and by some distance

Pictures ??

User avatar
Mark4211
92
Joined: 04 Jan 2014, 12:36
Location: Singapore

Re: McLaren MCL35M

Post

New ACS button which was only seen on Bottas's steering wheel and RP/AM's steering wheel is now on the McLaren

Image
Source

Ground Effect
Ground Effect
14
Joined: 02 Mar 2018, 12:39

Re: McLaren MCL35M

Post

The front wing on the car is the 2020 spec?
Last edited by Thunder on 29 Mar 2021, 07:41, edited 1 time in total.
Reason: removed FP timing discussion
Q: (Stefano Mancini – La Stampa) Kimi, will you help Vettel to win his championship this year?
Kimi Raikkonen: I can only drive one car, obviously. 
@2018 Singapore Grand Prix drivers press conference.

f1rules
f1rules
569
Joined: 11 Jan 2004, 15:34
Location: Denmark

Re: McLaren MCL35M

Post

Image

User avatar
Herr_Koos
12
Joined: 26 Feb 2010, 15:41

Re: McLaren MCL35M

Post

Excellent shot of the floor assembly! Wow, that's intricate stuff.

Owen.C93
Owen.C93
171
Joined: 24 Jul 2010, 17:52

Re: McLaren MCL35M

Post

Mark4211 wrote:
27 Mar 2021, 03:35
New ACS button which was only seen on Bottas's steering wheel and RP/AM's steering wheel is now on the McLaren

https://i.imgur.com/rkhC4NB.png
Source
The engineer mentioned it on the radio when Lando was complaining about some excess engine braking. It sounds like a toggle of some sort.
Motorsport Graduate in search of team experience ;)

User avatar
Thunder
Moderator
Joined: 06 Feb 2013, 09:50
Location: Germany

Re: McLaren MCL35M

Post

Please post your FP, qualy or Race analysis in the Team Thread. Posts have been moved.
turbof1 wrote: YOU SHALL NOT......STALLLLL!!!
#aerogollum