Red Bull RB16B

A place to discuss the characteristics of the cars in Formula One, both current as well as historical. Laptimes, driver worshipping and team chatter do not belong here.
Post Reply
User avatar
godlameroso
309
Joined: 16 Jan 2010, 21:27
Location: Miami FL

Re: Red Bull RB16B

Post

Alexf1 wrote:
02 Nov 2021, 09:46
Curbstone wrote:
02 Nov 2021, 08:40
A new chassis is not an upgrade. The specs of the new chassis must be the same as the old.
The replacement was done because there may have been something wrong with the old one, not because the new one was better.
Maybe they tested all chassis on flex and changed to the least flexing one(s)
The high rake philosophy may work wonderfully around places like Mexico and Brazil because the high rake promotes strong vorticity.

https://www.f1technical.net/features/23505

This wonderful and incredibly insightful article =D> mentions this in beautiful detailed CFD images.

Image

Perhaps the high rake setup with it's well defined vorticity is somewhat less sensitive to altitude changes for (in my caveman reasoning*) the same reason that turbocharged engines are somewhat less sensitive to altitude changes.
Saishū kōnā

User avatar
Bandit1216
21
Joined: 05 Oct 2018, 16:55
Location: Netherlands

Re: Red Bull RB16B

Post

godlameroso wrote:
02 Nov 2021, 17:09
Alexf1 wrote:
02 Nov 2021, 09:46
Curbstone wrote:
02 Nov 2021, 08:40
A new chassis is not an upgrade. The specs of the new chassis must be the same as the old.
The replacement was done because there may have been something wrong with the old one, not because the new one was better.
Maybe they tested all chassis on flex and changed to the least flexing one(s)
The high rake philosophy may work wonderfully around places like Mexico and Brazil because the high rake promotes strong vorticity.

https://www.f1technical.net/features/23505

This wonderful and incredibly insightful article =D> mentions this in beautiful detailed CFD images.

https://f1tcdn.net/images/features/2021 ... angled.jpg

Perhaps the high rake setup with it's well defined vorticity is somewhat less sensitive to altitude changes for (in my caveman reasoning*) the same reason that turbocharged engines are somewhat less sensitive to altitude changes.

I always wondered what the real reason was. A huge compressor, and so less rpm than needed on the compressor-mgu-h-turbine assembly, having more spare to increases rpm on altitude. I thought Renault and later Honda were more on the large side, accepting a little bit more lag (or more energy to compensate for lag), and merc being more on the limit, so they do not have rpm spare for altitude. Pikes peak engineers know all about this. The rpm on the turbo will increase significantly when the turbo is compensating for high altitude.

But the rake is beyond me. The turbo is quite simple a waste gate that compensates, but the chassis?

If you see the pictures of that article one could imagine why a merc is especially limited when trying to pass a redbull.
But just suppose it weren't hypothetical.

User avatar
godlameroso
309
Joined: 16 Jan 2010, 21:27
Location: Miami FL

Re: Red Bull RB16B

Post

Bandit1216 wrote:
02 Nov 2021, 17:22
godlameroso wrote:
02 Nov 2021, 17:09
Alexf1 wrote:
02 Nov 2021, 09:46


Maybe they tested all chassis on flex and changed to the least flexing one(s)
The high rake philosophy may work wonderfully around places like Mexico and Brazil because the high rake promotes strong vorticity.

https://www.f1technical.net/features/23505

This wonderful and incredibly insightful article =D> mentions this in beautiful detailed CFD images.

https://f1tcdn.net/images/features/2021 ... angled.jpg

Perhaps the high rake setup with it's well defined vorticity is somewhat less sensitive to altitude changes for (in my caveman reasoning*) the same reason that turbocharged engines are somewhat less sensitive to altitude changes.

I always wondered what the real reason was. A huge compressor, and so less rpm than needed on the compressor-mgu-h-turbine assembly, having more spare to increases rpm on altitude. I thought Renault and later Honda were more on the large side, accepting a little bit more lag (or more energy to compensate for lag), and merc being more on the limit, so they do not have rpm spare for altitude. Pikes peak engineers know all about this. The rpm on the turbo will increase significantly when the turbo is compensating for high altitude.

But the rake is beyond me. The turbo is quite simple a waste gate that compensates, but the chassis?

If you see the pictures of that article one could imagine why a merc is especially limited when trying to pass a redbull.
A compressor's inlet creates a vacuum, a suction at the throat, a compressor does in practice what the name ram air did in advertising.

The low pressure conduit at the throat of the compressor draws in air. The low pressure in a vortex acts as a conduit for air, and the effect is enhanced due to, well, ground effect. Because there's less atmospheric pressure, the core of the vortex being a conduit becomes more efficient, somewhat negating the reduction in overall mass flow. For the same reason the conduit in the compressor inlet negates the reduction in overall mass flow.
Saishū kōnā

Alexf1
8
Joined: 28 Jun 2018, 18:52

Re: Red Bull RB16B

Post

godlameroso wrote:
02 Nov 2021, 17:09
Alexf1 wrote:
02 Nov 2021, 09:46
Curbstone wrote:
02 Nov 2021, 08:40
A new chassis is not an upgrade. The specs of the new chassis must be the same as the old.
The replacement was done because there may have been something wrong with the old one, not because the new one was better.
Maybe they tested all chassis on flex and changed to the least flexing one(s)
The high rake philosophy may work wonderfully around places like Mexico and Brazil because the high rake promotes strong vorticity.

https://www.f1technical.net/features/23505

This wonderful and incredibly insightful article =D> mentions this in beautiful detailed CFD images.

https://f1tcdn.net/images/features/2021 ... angled.jpg

Perhaps the high rake setup with it's well defined vorticity is somewhat less sensitive to altitude changes for (in my caveman reasoning*) the same reason that turbocharged engines are somewhat less sensitive to altitude changes.
Indeed, if an F1 boss shouts to all look left (our engine works miracles on altitude) you know you have to look right (its the aero they don't want you to take a look at). Wasn't it a coincidence that in a RB not only the Renault engine did well on altitude but also the Honda..?

User avatar
diffuser
207
Joined: 07 Sep 2012, 13:55
Location: Montreal

Re: Red Bull RB16B

Post

godlameroso wrote:
02 Nov 2021, 18:03
Bandit1216 wrote:
02 Nov 2021, 17:22
godlameroso wrote:
02 Nov 2021, 17:09


The high rake philosophy may work wonderfully around places like Mexico and Brazil because the high rake promotes strong vorticity.

https://www.f1technical.net/features/23505

This wonderful and incredibly insightful article =D> mentions this in beautiful detailed CFD images.

https://f1tcdn.net/images/features/2021 ... angled.jpg

Perhaps the high rake setup with it's well defined vorticity is somewhat less sensitive to altitude changes for (in my caveman reasoning*) the same reason that turbocharged engines are somewhat less sensitive to altitude changes.

I always wondered what the real reason was. A huge compressor, and so less rpm than needed on the compressor-mgu-h-turbine assembly, having more spare to increases rpm on altitude. I thought Renault and later Honda were more on the large side, accepting a little bit more lag (or more energy to compensate for lag), and merc being more on the limit, so they do not have rpm spare for altitude. Pikes peak engineers know all about this. The rpm on the turbo will increase significantly when the turbo is compensating for high altitude.

But the rake is beyond me. The turbo is quite simple a waste gate that compensates, but the chassis?

If you see the pictures of that article one could imagine why a merc is especially limited when trying to pass a redbull.
A compressor's inlet creates a vacuum, a suction at the throat, a compressor does in practice what the name ram air did in advertising.

The low pressure conduit at the throat of the compressor draws in air. The low pressure in a vortex acts as a conduit for air, and the effect is enhanced due to, well, ground effect. Because there's less atmospheric pressure, the core of the vortex being a conduit becomes more efficient, somewhat negating the reduction in overall mass flow. For the same reason the conduit in the compressor inlet negates the reduction in overall mass flow.
Maybe it worse cause low rake has 2 vortexs closer together that help push each other?

Image


Anyways both Merc and RBR are running high rake.


That article avoided talking about the being able to run a 2 degrees lower rear wing angle(with High rake) and getting the same rear wing angle(at lower speeds)of a low rake car.

Also was RBR having the FIA check Merc rear suspension...Is that confirmation that they think Merc is using a 3 stage high rake ? Where at extreme high speed they feel the Merc is getting so low in the rear of the car that they're stalling the diffuser resulting in less DF and drag?

User avatar
hollus
Moderator
Joined: 29 Mar 2009, 01:21
Location: Copenhagen, Denmark

Re: Red Bull RB16B

Post

Wrong thread... You are more than welcome to link to a rake thread, or create one, and continue there. But here, please, RB16 or nothing.
Rivals, not enemies.

User avatar
Bandit1216
21
Joined: 05 Oct 2018, 16:55
Location: Netherlands

Re: Red Bull RB16B

Post

hollus wrote:
02 Nov 2021, 21:01
Wrong thread... You are more than welcome to link to a rake thread, or create one, and continue there. But here, please, RB16 or nothing.
Hmmmmm. May I please have a bit reservation on that, or will that get me banned? Can one talk about Alexandra Daddario and whether She is beautiful or not, without discussing her (imo) very beautiful breaths? It's kinda a package deal isn't it? Alexandra is definitely off topic. I can agree in that :D
But just suppose it weren't hypothetical.

User avatar
Wouter
106
Joined: 16 Dec 2017, 13:02

Re: Red Bull RB16B

Post

Red Bull: several brake sockets for thin air
Giorgio Piola
Nov 5, 2021, 10:13 am
The Milton Keynes team introduced an enhanced brake cooling system in Mexico City to provide the disc and pads with the necessary fresh air despite a flow with a density much less than sea level.
Image


More pictures of the RB16B in Mexico. Just click on the arrows in the images to scroll through them…

https://www.motorsport.com/f1/news/f1-m ... s/6747934/
The Power of Dreams!

User avatar
Morteza
2308
Joined: 10 Feb 2010, 18:23
Location: Bushehr, Iran

Re: Red Bull RB16B

Post

Image

Image

Image

Image

Image

Image

Image

Image
Via Motorsport.com
"A fool thinks himself to be wise, but a wise man knows himself to be a fool."~William Shakespeare

dxpetrov
-7
Joined: 24 May 2012, 15:39

Re: Red Bull RB16B

Post

Monaco style rear wing, as expected...

User avatar
etusch
131
Joined: 22 Feb 2009, 23:09
Location: Turkey

Re: Red Bull RB16B

Post

Morteza wrote:
05 Nov 2021, 15:50

Image
Metal teeths at older became CF.

Image

SuperCNJ
2
Joined: 19 Sep 2014, 14:36

Re: Red Bull RB16B

Post

Any clues as to whether there could be upgrades for the last two races or is it too late for that now?

User avatar
Wouter
106
Joined: 16 Dec 2017, 13:02

Re: Red Bull RB16B

Post

Can anyone tell me where I can find the race scrutineering of the last race?
I'm curious about car 33 and car 11. The last pdf I can find is this one:

https://www.fia.com/sites/default/files ... eering.pdf
The Power of Dreams!

User avatar
west52keep64
51
Joined: 16 Sep 2021, 00:05

Re: Red Bull RB16B

Post

Wouter wrote:
25 Nov 2021, 22:14
Can anyone tell me where I can find the race scrutineering of the last race?
I'm curious about car 33 and car 11. The last pdf I can find is this one:

https://www.fia.com/sites/default/files ... eering.pdf
It's here:
https://www.fia.com/sites/default/files ... eering.pdf

User avatar
Wouter
106
Joined: 16 Dec 2017, 13:02

Re: Red Bull RB16B

Post

west52keep64 wrote:
26 Nov 2021, 00:32
Wouter wrote:
25 Nov 2021, 22:14
Can anyone tell me where I can find the race scrutineering of the last race?
I'm curious about car 33 and car 11. The last pdf I can find is this one:

https://www.fia.com/sites/default/files ... eering.pdf
It's here:
https://www.fia.com/sites/default/files ... eering.pdf
Thank you @west52keep64.

This ( Event&Timing Information) is the site I always use during the raceweekends when I go to the FIA site
and there is no doc 53 at the Technical Reports,
normaly there is always the race scrutineering, this time it isn't. :

https://www.fia.com/events/fia-formula- ... nformation
The Power of Dreams!

Post Reply