Williams FW44

A place to discuss the characteristics of the cars in Formula One, both current as well as historical. Laptimes, driver worshipping and team chatter do not belong here.
Post Reply
User avatar
Blackout
1562
Joined: 09 Feb 2010, 04:12

Re: Williams FW44

Post

The sidepods seem to be direct evolutions of the previous williams cars, very short and downwashy sidepods, with very little side undercut at their widest point...
So the engine cover around the engine looks very similar too, but with a smaller bulge around the fuel tank. (in the last Williams cars, that bulge was caused by their particular fuel tank shape and their large and protruding intercooler-to- engine duct.

F1doc
9
Joined: 25 Feb 2021, 09:09

Re: Williams FW44

Post

From afar it looks like Prost is back on the grid. Interesting to see another proper car rather than a render, and makes a mockery of their earlier livery reveal if they were going to post shakedown photos regardless.

User avatar
Starscreamer
1
Joined: 31 Jan 2015, 09:42
Location: Netherlands

Re: Williams FW44

Post

Looks like the Simtek 1995 livery.
Nice =D>
#33 2 THE MAX 3RSTAPP3N
***WORLD CHAMPION 2021, 2022 & 2023

CrazyCarperF1
0
Joined: 01 Feb 2015, 17:31

Re: Williams FW44

Post

Is the front suspension single wishbone or is it just the angle?

User avatar
Zynerji
111
Joined: 27 Jan 2016, 16:14

Re: Williams FW44

Post

The top of the nose, upon close inspection, seems to have some shape to it. It resembles a finger/finger-nail like topology.

Very interesting indeed.

User avatar
Marc.W
24
Joined: 04 Mar 2012, 14:08
Location: Belfast, N.I

Re: Williams FW44

Post

CrazyCarperF1 wrote:
15 Feb 2022, 18:17
Is the front suspension single wishbone or is it just the angle?
Hard to tell, but the leading element of it is super thick!

User avatar
Pandamasque
17
Joined: 09 Nov 2009, 17:28
Location: Kyiv, Ukraine
Contact:

Re: Williams FW44

Post

Marc.W wrote:
15 Feb 2022, 18:26
CrazyCarperF1 wrote:
15 Feb 2022, 18:17
Is the front suspension single wishbone or is it just the angle?
Hard to tell, but the leading element of it is super thick!
It looks like the upper arms are parallel to each other and are both in front of the pushrod, whereas the bottom arms have a traditional layout.

User avatar
NicoS
-2
Joined: 11 Feb 2022, 17:21

Re: Williams FW44

Post

Wow! this is almost Lamborghini 291!
Image
I did not expect this degree of detail and development from Williams. makes AM look budget and very, very clumsy!

Hoffman900
163
Joined: 13 Oct 2019, 03:02

Re: Williams FW44

Post

NicoS wrote:
15 Feb 2022, 18:31
Wow! this is almost Lamborghini 291!
http://www.looksmartmodels.com/wp-conte ... F1_-02.jpg
I did not expect this degree of detail and development from Williams. makes AM look budget and very, very clumsy!
Forgot about that one!

As an aside, there is one of those engines for sale here in the States.

User avatar
RedNEO
30
Joined: 09 Jul 2016, 12:58

Re: Williams FW44

Post

AeroDynamic wrote:
15 Feb 2022, 17:55
How can Williams do that, while Aston Martin's body was not exactly petite? And the McLaren.. pretty Obese.
McLaren we can’t compare fully until it’s out on track but certainly compared to the Aston the Williams looks very good

Jolle
132
Joined: 29 Jan 2014, 22:58
Location: Dordrecht

Re: Williams FW44

Post

Looks like, with the floor being the most important source of downforce, they compromised flow to the rear wing all in favour for the floor. Could be smart thinking... bit like Alpine worked on in 2021.

toraabe
12
Joined: 09 Oct 2014, 10:42

Re: Williams FW44

Post

This car could be their route to the front. Wery nice

Hoffman900
163
Joined: 13 Oct 2019, 03:02

Re: Williams FW44

Post

So far, I think the only three cars we can really compare are the Aston, Alfa, and Williams. Mclaren obviously is hiding / withholding stuff, RBR hasn’t shown anything yet, and Haas was just an early render.
Last edited by Thunder on 15 Feb 2022, 19:59, edited 1 time in total.
Reason: Post cleaned up

User avatar
NicoS
-2
Joined: 11 Feb 2022, 17:21

Re: Williams FW44

Post

Who is currently the lead in their design team?
Last edited by Thunder on 15 Feb 2022, 20:00, edited 1 time in total.
Reason: Post cleaned up

User avatar
continuum16
49
Joined: 30 Nov 2015, 17:35
Location: Kansas
Contact:

Re: Williams FW44

Post

Image

Does anyone else get late 2000s vibes from the shape of the sidepod inlets? For some reason it reminds me of the 2008/09 era with the trapezoidal shape. Also, these pictures were pretty well selected, since they don't show anything about the leading edge of the floor or the side profile of the car.

Interesting to see if they are the only team to go for a round nose; I feel like it might be slightly less draggy but not sure if that's true, or how much of a difference it would even make.
"You can't argue with stupid people, they will drag you down to their level and beat you with experience"
- Mark Twain

Post Reply