New Videos

Post here all non technical related topics about Formula One. This includes race results, discussions, testing analysis etc. TV coverage and other personal questions should be in Off topic chat.
johnny comelately
johnny comelately
110
Joined: 10 Apr 2015, 00:55
Location: Australia

Re: New Videos

Post

Go Mario

User avatar
Zynerji
110
Joined: 27 Jan 2016, 16:14

Re: New Videos

Post

johnny comelately wrote:
15 Oct 2022, 22:40
Go Mario
McLaren-Andretti confirmed! 😂

johnny comelately
johnny comelately
110
Joined: 10 Apr 2015, 00:55
Location: Australia

Re: New Videos

Post

How good is this
At first I thought that there was a problem with the TV aspect ratio...
The wet drys and the howwwl...

johnny comelately
johnny comelately
110
Joined: 10 Apr 2015, 00:55
Location: Australia

Re: New Videos

Post

Another stroll down nostalgia alley.
Isky cams founder Ed Iskendarian still percolating at 101.
This guy was responsible for the development of the most potent cam grinds.
Between him and Yoshimura their contribution to race engine performance was integral to where it is today.
The shop where I worked used his stuff to win so many races in the 70's.
So here is a little history...


johnny comelately
johnny comelately
110
Joined: 10 Apr 2015, 00:55
Location: Australia

Re: New Videos

Post

Even further back...
"At the beginning of 1909, engineer Julius Ganss was given permission to design a car which could reach a speed of over 200 km/h. Initially Carl Benz was against the project, failing to see the relevance of building a land speed record car when the aim of his company was to build robust and reliable touring cars. But then his attitude changed and he came to the conclusion that the company couldn't ignore the tricks of modern market mechanisms.

Based on the 1908 Benz 150HP racer, the four-cylinder engine was bored out from 15.1-litres to 21.5-litres with an output of 184 hp at 1,500 rpm, which was later increased to 200 hp at 1600 rpm after some development. It was the largest-displacement engine ever to be used in a racing or record car produced by Benz and its weight was 407 kg (the car's total weight was 1,450kg). The development and the task of competing with this monster were assigned to Victor Hémery e Victor Demogeot. ..."


User avatar
Andres125sx
166
Joined: 13 Aug 2013, 10:15
Location: Madrid, Spain

Re: New Videos

Post

johnny comelately wrote:
28 Oct 2022, 19:12
Even further back...
"At the beginning of 1909, engineer Julius Ganss was given permission to design a car which could reach a speed of over 200 km/h. Initially Carl Benz was against the project, failing to see the relevance of building a land speed record car when the aim of his company was to build robust and reliable touring cars. But then his attitude changed and he came to the conclusion that the company couldn't ignore the tricks of modern market mechanisms.

Based on the 1908 Benz 150HP racer, the four-cylinder engine was bored out from 15.1-litres to 21.5-litres with an output of 184 hp at 1,500 rpm, which was later increased to 200 hp at 1600 rpm after some development. It was the largest-displacement engine ever to be used in a racing or record car produced by Benz and its weight was 407 kg (the car's total weight was 1,450kg). The development and the task of competing with this monster were assigned to Victor Hémery e Victor Demogeot. ..."


21.5 litre engine? Wow
Max power at 1500-1600rmp? That must have some torque

The whole car has some serious movement when accelerating still, hitting the throttle mid-corner should be interesting :o

johnny comelately
johnny comelately
110
Joined: 10 Apr 2015, 00:55
Location: Australia

Re: New Videos

Post

The Porsche Historic racing division do a stupendous job at restoring their cars.
About 6 years ago they restored one of Sefan Bellof's Rothman's cars, from memory a 956, to perfection.
https://en.wikipedia.org/wiki/Stefan_Bellof
https://en.wikipedia.org/wiki/Porsche_956
But apart from all this of course Mark Donohue and Mr Penske had other less than optimal experiences with Porsche and their Can Am cars. They did most of their very effective chassis testing on a simple skid pad, a far cry from todays data driven behemoth.
I would have to recomend the book "The Unfair Advantage" by Mark Donohue.


F1Supporter
F1Supporter
0
Joined: 28 Oct 2022, 09:46

Re: New Videos

Post

johnny comelately wrote:
31 Oct 2022, 13:21
The Porsche Historic racing division do a stupendous job at restoring their cars.
About 6 years ago they restored one of Sefan Bellof's Rothman's cars, from memory a 956, to perfection.
https://en.wikipedia.org/wiki/Stefan_Bellof
https://en.wikipedia.org/wiki/Porsche_956
But apart from all this of course Mark Donohue and Mr Penske had other less than optimal experiences with Porsche and their Can Am cars. They did most of their very effective chassis testing on a simple skid pad, a far cry from todays data driven behemoth.
I would have to recomend the book "The Unfair Advantage" by Mark Donohue.

awesome video, thanks for sharing

johnny comelately
johnny comelately
110
Joined: 10 Apr 2015, 00:55
Location: Australia

Re: New Videos

Post

Only half :wink: the usual story but fascinating all the same partic if you remember Malcolm Smith, maybe from the movie On Any Sunday.
https://en.wikipedia.org/wiki/Malcolm_S ... orcyclist)

johnny comelately
johnny comelately
110
Joined: 10 Apr 2015, 00:55
Location: Australia

Re: New Videos

Post

Nige !
at Churchill Engineering College, Cambridge - the former Williams/Ferrari/McLaren engineer, John Sutton explains...

the mapping blindspot

MadMax
MadMax
4
Joined: 22 Oct 2022, 03:23

Re: New Videos

Post

Andres125sx wrote:
29 Oct 2022, 13:25


21.5 litre engine? Wow
Max power at 1500-1600rmp? That must have some torque
About 900Nm for 200hp at 1600rpm. Sort of thing decent modern high-performance engines do in a much smaller package. They also make twice the power (or more), but that's progress for you. =D>

Bentayga 6.0 W12 makes over 600hp at 5000rpm along with making 900Nm at 1350rpm. Twin turbos help, of course.

Many modern engines are mapped to limit torque to keep the gearbox happy - 700Nm is a common figure as many such cars use a version of the popular 8-speed ZF automatic gearbox. The engines could make much more torque if given free rein.

johnny comelately
johnny comelately
110
Joined: 10 Apr 2015, 00:55
Location: Australia

Re: New Videos

Post

Sans engine

User avatar
Andres125sx
166
Joined: 13 Aug 2013, 10:15
Location: Madrid, Spain

Re: New Videos

Post

johnny comelately wrote:
11 Nov 2022, 12:53
Sans engine
But two enormous balls!! :shock: =D> =D> =D> =D>

User avatar
etusch
131
Joined: 22 Feb 2009, 23:09
Location: Turkey

Re: New Videos

Post


johnny comelately
johnny comelately
110
Joined: 10 Apr 2015, 00:55
Location: Australia

Re: New Videos

Post

Good video Etusch, that company explains everything.
The interesting and complex thing is resins.
(and Toprak wins in Mandalika today)