Red Bull RB5 aero-mech development in 2009

Here are our CFD links and discussions about aerodynamics, suspension, driver safety and tyres. Please stick to F1 on this forum.
bar555
bar555
10
Joined: 08 Aug 2007, 18:13
Location: Greece - Athens

Red Bull RB5 aero-mech development in 2009

Post

FRONT WING - JEREZ FEBRUARY TESTING
Image

Image

Image




FRONT WING - AUSTRALIA
Image


Image

The RB5 is one of the most innovative and radical cars of 2009. The chassis is V-shaped (1) on top, improving the management of airflow towards the rear of the car. Both the chassis and suspension are higher than on the previous RB4, as is the position of the driver's feet. The two central pillars (2) connecting the nose to the front wing are straight and close together, while the wing's main plane is intricately shaped where it joins the endplate (3) to direct airflow under the wing. Both the main plane and the upper flap are slotted (4). Also note the ballast compartment (5) in the endplate.
Source : www.f1.com

Image




FRONT WING - MALAYSIA
Image


Image

Image
Future is like walking into past......

Blog : http://formula1techandart.wordpress.com/
Twitter :http://twitter.com/bar555onF1

bar555
bar555
10
Joined: 08 Aug 2007, 18:13
Location: Greece - Athens

Re: Red Bull RB5 aero-mech development in 2009

Post

REAR WING - JEREZ FEBRUARY TESTING
Image




REAR WING - AUSTRALIA
Image

The shark fin is connected directly to the rear wing

Image




REAR WING - MALAYSIA
Image

Image
Future is like walking into past......

Blog : http://formula1techandart.wordpress.com/
Twitter :http://twitter.com/bar555onF1

bar555
bar555
10
Joined: 08 Aug 2007, 18:13
Location: Greece - Athens

Re: Red Bull RB5 aero-mech development in 2009

Post

FRONT SUSPENSION - KEEL
Image
The RB5 is almost certainly the most innovative and extreme car on the 2009 grid. Its chassis is very high at the front, with its unique U-shape meaning the front suspension's lower wishbones share almost a single pickup point, with just a small separation in between (red arrow). This solution has the benefit of allowing a large volume of air to pass under the chassis and feed the (conventional) rear diffuser.
Source : www.f1.com



Image

1.Upper wishbone
2.Lower wishbone
3.Pushrod
4.Ride height sensor
5.Nose to Front wing connection
6.Steering arm

Image
Future is like walking into past......

Blog : http://formula1techandart.wordpress.com/
Twitter :http://twitter.com/bar555onF1

bar555
bar555
10
Joined: 08 Aug 2007, 18:13
Location: Greece - Athens

Re: Red Bull RB5 aero-mech development in 2009

Post

REAR SUSPENSION
Image
The RB5 brings pull-rod rear suspension back to Formula One for the first time in over 20 years. With the diffuser moving rearwards under the revised 2009 regulations, the pull-rod layout (2) - where the suspension rockers are pulled rather than pushed by the rod - allows for cleaner aero packaging (see inset for more common push-rod set-up). The pull-rod suspension is lighter and, along with a gearbox that is now 15cm lower, helps to lower the car's centre of gravity and improve handling. The top wishbone is a single piece and is attached very high at the rear of the car (1), forming a wing-like section that works together with the lower section of the rear wing. Also note the very low and rearward positioning of the exhausts (3), which exit just under the front arm of the rear wishbone, and the lack of a central pillar to the rear wing, which is instead mounted via the wing's two large endplates, which attach directly to the diffuser.
source : www.f1.com



ENGINE COVER - AUSTRALIA
Image




FRONT WHEEL RIM SHIELDS - AUSTRALIA
Image

Different fairings for Australia





FRONT BRAKES - AUSTRALIA
Image


Image





FLOOR
Image
Future is like walking into past......

Blog : http://formula1techandart.wordpress.com/
Twitter :http://twitter.com/bar555onF1

bar555
bar555
10
Joined: 08 Aug 2007, 18:13
Location: Greece - Athens

Re: Red Bull RB5 aero-mech development in 2009

Post

Image

Image




NOSE CONE
Image



BARGEBOARDS
Image



REAR LIGHT
Image
Future is like walking into past......

Blog : http://formula1techandart.wordpress.com/
Twitter :http://twitter.com/bar555onF1

bar555
bar555
10
Joined: 08 Aug 2007, 18:13
Location: Greece - Athens

Re: Red Bull RB5 aero-mech development in 2009

Post

DIFFUSER
Image


Image


Extended rear wing’s endplates which meet the diffuser.




FRONT BRAKES - MALAYSIA
Image

Image
Future is like walking into past......

Blog : http://formula1techandart.wordpress.com/
Twitter :http://twitter.com/bar555onF1

User avatar
GTO
0
Joined: 09 Jun 2005, 01:16
Location: Oil Country

Re: Red Bull RB5 aero-mech development in 2009

Post

A+ for bar555 towarads this great work in posts.

B for Adrian Newey, Geoff Willis team for designing a beautiful car, that has moved up the grid considerably from 7th overall last year to currently 2nd. However, it is not yet capable of matching the pace of Brawn. I believe, most of that shortfall is with the Renault engine and the RB5 chassis on its own is capable of winning races if it had a stronger engine.

tadzio89
tadzio89
0
Joined: 13 May 2009, 16:52

Re: Red Bull RB5 aero-mech development in 2009

Post

Why do you think that Renault engine is not good enough?

wesley123
wesley123
204
Joined: 23 Feb 2008, 17:55

Re: Red Bull RB5 aero-mech development in 2009

Post

too less power, a not very well reliability
"Bite my shiny metal ass" - Bender

bar555
bar555
10
Joined: 08 Aug 2007, 18:13
Location: Greece - Athens

Re: Red Bull RB5 aero-mech development in 2009

Post

REAR FOOTLATE HOLE
Image

Introduced in Malaysia and retained for China is this hole in the floor's footplate in front of the rear tyres. Its purpose is to create a vortex that improves the quality of the airflow directed into the side channels of the rear diffuser, thus boosting downforce.(From http://www.f1.com)




STEERING WHEEL
Image
Future is like walking into past......

Blog : http://formula1techandart.wordpress.com/
Twitter :http://twitter.com/bar555onF1

Dragonfly
Dragonfly
23
Joined: 17 Mar 2008, 21:48
Location: Bulgaria

Re: Red Bull RB5 aero-mech development in 2009

Post

A shot from Monaco (Vettel's car) with, what I believe, the latest modifications on the floor and ducts to feed the DD. Also the conventional diffuser is well seen.
Image
F1PitRadio ‏@F1PitRadio : MSC, "Sorry guys, there's not more in it"
Spa 2012

NormalChris
NormalChris
1
Joined: 13 Feb 2009, 21:44

Re: Red Bull RB5 aero-mech development in 2009

Post

Awesome pic!

BreezyRacer
BreezyRacer
2
Joined: 04 Nov 2006, 00:31

Re: Red Bull RB5 aero-mech development in 2009

Post

Great great shots! That RB5 is sooo sweet! Have you noticed the filup/diffusers that were added to the sides of the floor along the sidepod area a few races a go? I would like to see more about those .. I'm surprised no one has talked them up. It looks to be a sweet detail.

bar555
bar555
10
Joined: 08 Aug 2007, 18:13
Location: Greece - Athens

Re: Red Bull RB5 aero-mech development in 2009

Post

FRONT BRAKES - CHINA
Image




REAR BRAKES - CHINA
Image





FRONT BRAKES - BAHRAIN
Image

Image
Future is like walking into past......

Blog : http://formula1techandart.wordpress.com/
Twitter :http://twitter.com/bar555onF1

DM0407
DM0407
0
Joined: 01 Aug 2008, 00:36

Re: Red Bull RB5 aero-mech development in 2009

Post

I remember a few weeks back everyone was talking about how the Brawn cars have their calipers mounted below the rotor. Now it seems like every team is doing it.

Now all the teams have the brakes this way... Did it really take the Brawn's doing this for the other teams to realize it? Seems like a pretty straight forward issue.