McLaren MCL33

A place to discuss the characteristics of the cars in Formula One, both current as well as historical. Laptimes, driver worshipping and team chatter do not belong here.
GoranF1
GoranF1
155
Joined: 16 Dec 2014, 12:53
Location: Zagreb,Croatia

Re: McLaren MCL33

Post

In the 2nd picture there is atachment point on the sidepod, is that from old BB or for something new?
"I have no idols. I admire work, dedication & competence."

radosav
radosav
23
Joined: 05 Feb 2012, 20:46

Re: McLaren MCL33

Post

GoranF1 wrote:
12 Apr 2018, 14:50
In the 2nd picture there is atachment point on the sidepod, is that from old BB or for something new?
It is old , for old bargeboard

User avatar
Thunder
Moderator
Joined: 06 Feb 2013, 09:50
Location: Germany

Re: McLaren MCL33

Post

These are the mounting Points for the Old Version. They just didn't make new Sidepods for the new Items.
turbof1 wrote: YOU SHALL NOT......STALLLLL!!!
#aerogollum

User avatar
diffuser
210
Joined: 07 Sep 2012, 13:55
Location: Montreal

Re: McLaren MCL33

Post

Did we just not see that whole section at the front edge and below the kimoa bardge board cause its normally hidden by the tire or is that new? The piece that looks like a hand grip.

Image

User avatar
mclaren111
275
Joined: 06 Apr 2014, 10:49
Location: Shithole - South Africa

Re: McLaren MCL33

Post

Looks different / new to me too.

User avatar
variante
133
Joined: 09 Apr 2012, 11:36
Location: Monza

Re: McLaren MCL33

Post

RZS10 wrote:
12 Apr 2018, 14:29
I still don't see any legality-cuts in the floor ... am i missing something? And by that i mean in both meanings, not seeing and lack of rule knowledge...
No need to have legality cuts in the outer 100mm of the floor anymore.

Check out Article 3.7.9 b):
In an area lying 700mm or less from the car centre plane, and from 450mm forward of the plane C-C to 350mm forward of the rear wheel centre line, any intersection of any bodywork visible from beneath the car with a lateral or longitudinal vertical plane should form one continuous line which is visible from beneath the car.
(the floor can extend up to 800mm from the car centre plane)

User avatar
FW17
168
Joined: 06 Jan 2010, 10:56

Re: McLaren MCL33

Post

Image
Image
Image

User avatar
godlameroso
309
Joined: 16 Jan 2010, 21:27
Location: Miami FL

Re: McLaren MCL33

Post

diffuser wrote:
12 Apr 2018, 15:39
Did we just not see that whole section at the front edge and below the kimoa bardge board cause its normally hidden by the tire or is that new? The piece that looks like a hand grip.

https://pbs.twimg.com/media/Dak0EE_UwAAHjxX.jpg
Every car has that area raised to some extent, it's the same concept the raised noses had back in 2012/13, more airflow to the diffuser. It's almost like a ground effect craft, but with a diffuser on the trailing end.
Saishū kōnā

User avatar
godlameroso
309
Joined: 16 Jan 2010, 21:27
Location: Miami FL

Re: McLaren MCL33

Post

Nothing like jamming your obtrusive watermark over the tastiest details. :cry:
Saishū kōnā

User avatar
MtthsMlw
1033
Joined: 12 Jul 2017, 18:38
Location: Germany

Re: McLaren MCL33

Post

Image

f1rules
f1rules
577
Joined: 11 Jan 2004, 15:34
Location: Denmark

Re: McLaren MCL33

Post


GoranF1
GoranF1
155
Joined: 16 Dec 2014, 12:53
Location: Zagreb,Croatia

Re: McLaren MCL33

Post

"I have no idols. I admire work, dedication & competence."

f1rules
f1rules
577
Joined: 11 Jan 2004, 15:34
Location: Denmark

Re: McLaren MCL33

Post

im not sure, i think it was introduced at the last gp, we just didnt have good enough pics to confirm

Nonserviam85
Nonserviam85
6
Joined: 17 May 2013, 11:21

Re: McLaren MCL33

Post

This sidepod deflector looks so basic. I believe they are trying to understand the whole sidepod deflector concept better in this couple of races.

PhillipM
PhillipM
385
Joined: 16 May 2011, 15:18
Location: Over the road from Boothy...

Re: McLaren MCL33

Post

They've probably just fitted what will work with the current package until the bigger updates are ready (nose+sidepods)