etsmc wrote: ↑
Wed Jul 11, 2018 3:57 am
so I have a simulation running at the moment using blueCFD-Core-2017-2 and the latest MantiumFlow, the only geometry I have is wheels in the frt_wheels and frr_wheels folder and the rear wing in the high res folder.
It seems to be taking a lot longer...
Time = 19
smoothSolver: Solving for Ux, Initial residual = 0.18640888, Final residual = 0.00040734291, No Iterations 2
smoothSolver: Solving for Uy, Initial residual = 0.205356, Final residual = 0.00025854882, No Iterations 2
smoothSolver: Solving for Uz, Initial residual = 0.27623981, Final residual = 0.0003475833, No Iterations 2
GAMG: Solving for p, Initial residual = 0.44512728, Final residual = 0.004415026, No Iterations 16
GAMG: Solving for p, Initial residual = 0.0017387356, Final residual = 1.3195199e-005, No Iterations 17
time step continuity errors : sum local = 2.8274649e-013, global = 7.4193289e-016, cumulative = 9.599932e-016
smoothSolver: Solving for omega, Initial residual = 0.0039757704, Final residual = 3.0044545e-006, No Iterations 2
smoothSolver: Solving for k, Initial residual = 0.33430139, Final residual = 0.00036918317, No Iterations 2
ExecutionTime = 1354.347 s
ClockTime = 1354 s
also cm,cd,cl etc are all 0
previously my execution times were mear seconds. anyone else got a simulation to run?