Alfa Romeo C38

A place to discuss the characteristics of the cars in Formula One, both current as well as historical. Laptimes, driver worshipping and team chatter do not belong here.
Post Reply
User avatar
DiogoBrand
73
Joined: 14 May 2015, 19:02
Location: Brazil

Re: Alfa Romeo "2019 Contender"

Post

Seems like they want to use the front wing almost exclusively for downforce, rather than controlling front tyre wake.

Manoah2u
61
Joined: 24 Feb 2013, 14:07

Re: Alfa Romeo "2019 Contender"

Post

well right there is the most interesting car i've seen till now. :shock:
"Explain the ending to F1 in football terms"
"Hamilton was beating Verstappen 7-0, then the ref decided F%$& rules, next goal wins
while also sending off 4 Hamilton players to make it more interesting"

User avatar
Blackout
1562
Joined: 09 Feb 2010, 04:12

Re: Alfa Romeo "2019 Contender"

Post

DiogoBrand wrote:
14 Feb 2019, 14:59
Seems like they want to use the front wing almost exclusively for downforce, rather than controlling front tyre wake.
I disagree, they want to induce some outwash by angling the winglets towards the exterior... and by removing that chunk, the air travels more freely toward the outer face of the wheel. It's similar to STR and Renault but much more extreme.
Last edited by Blackout on 14 Feb 2019, 15:13, edited 2 times in total.

kalinka
9
Joined: 19 Feb 2010, 00:01
Location: Hungary

Re: Alfa Romeo "2019 Contender"

Post

AlfamaniacGR wrote:
14 Feb 2019, 14:48
At first glance it seems that Sauber tried to make the lower part of the engine cover as slim as possible while making the part behind the engine intake quite bulky. It would be interesting to see how that will work against the Ferrari or the Haas interpretation...
Agreed, can't spot any engine cover fin. The transition form one side to other is smooth, without any sharp edges on top of engine cover. Looks bad for CoG, but maybe it's just for lightweight cooling ducts...interesting

User avatar
Vasconia
6
Joined: 30 Aug 2012, 10:45
Location: Basque Country

Re: Alfa Romeo "2019 Contender"

Post

As it has been mentioned, incredible front wing, it looks fragile though.

User avatar
Morteza
2308
Joined: 10 Feb 2010, 18:23
Location: Bushehr, Iran

Re: Alfa Romeo "2019 Contender"

Post

Image
Last edited by Morteza on 14 Feb 2019, 15:45, edited 1 time in total.
"A fool thinks himself to be wise, but a wise man knows himself to be a fool."~William Shakespeare

User avatar
dren
226
Joined: 03 Mar 2010, 14:14

Re: Alfa Romeo "2019 Contender"

Post

I don't see any strakes under the wing.
Honda!

Jolle
132
Joined: 29 Jan 2014, 22:58
Location: Dordrecht

Re: Alfa Romeo "2019 Contender"

Post

It looks more like they are still baking some wing parts. If F1 design trough the years shown us anything, is that you put up some kind of deflector/wing/anything at any point on the car where it's allowed.

User avatar
Giando
93
Joined: 10 Jan 2012, 17:56
Location: Milan (Italy)

Re: Alfa Romeo "2019 Contender"

Post

Ok guys... you know what?

Maybe - i wrote maybe! - that void will be filled with some special shaped flow conditioner from monday on...
something they choosed to not reveal today.

In fact, i am very suspicious about the simplicity of the wings seen up to now.
I expect everyone to reveal something much more advanced in that particular area.

User avatar
Morteza
2308
Joined: 10 Feb 2010, 18:23
Location: Bushehr, Iran

Re: Alfa Romeo "2019 Contender"

Post

Image

Image

Image
"A fool thinks himself to be wise, but a wise man knows himself to be a fool."~William Shakespeare

User avatar
ScrewCaptain27
577
Joined: 31 Jan 2017, 01:13
Location: Udine, Italy

Re: Alfa Romeo "2019 Contender"

Post

Wheelbase looks to be quite short compared to what we’ve seen so far.
"Stupid people do stupid things. Smart people outsmart each other, then themselves."
- Serj Tankian

User avatar
NathanOlder
48
Joined: 02 Mar 2012, 10:05
Location: Kent

Re: Alfa Romeo "2019 Contender"

Post

Giando wrote:
14 Feb 2019, 15:48
Ok guys... you know what?

Maybe - i wrote maybe! - that void will be filled with some special shaped flow conditioner from monday on...
something they choosed to not reveal today.

In fact, i am very suspicious about the simplicity of the wings seen up to now.
I expect everyone to reveal something much more advanced in that particular area.
Wouldn't they just stick a standard 2019 wing on it, so people dont even talk about it.
GoLandoGo
Lewis v2.0
King George has arrived.

New found love for GT racing with Assetto Corsa Competizione on PS5 & PC

wesley123
204
Joined: 23 Feb 2008, 17:55

Re: Alfa Romeo "2019 Contender"

Post

Jolle wrote:
14 Feb 2019, 15:46
It looks more like they are still baking some wing parts. If F1 design trough the years shown us anything, is that you put up some kind of deflector/wing/anything at any point on the car where it's allowed.
I'm not so sure, though. Considering the connection that seems to be in place and how front wings are built it would be much more likely that the adjustable flap would be missing.
"Bite my shiny metal ass" - Bender

User avatar
Giando
93
Joined: 10 Jan 2012, 17:56
Location: Milan (Italy)

Re: Alfa Romeo "2019 Contender"

Post

NathanOlder wrote:
14 Feb 2019, 15:52
Giando wrote:
14 Feb 2019, 15:48
Ok guys... you know what?

Maybe - i wrote maybe! - that void will be filled with some special shaped flow conditioner from monday on...
something they choosed to not reveal today.

In fact, i am very suspicious about the simplicity of the wings seen up to now.
I expect everyone to reveal something much more advanced in that particular area.
Wouldn't they just stick a standard 2019 wing on it, so people dont even talk about it.
Fair point.

Very interesting in both cases!

Clown
20
Joined: 29 Nov 2013, 18:24

Re: Alfa Romeo "2019 Contender"

Post


Post Reply