Explaination of McLaren J-Damper = Inerter

All that has to do with the power train, gearbox, clutch, fuels and lubricants, etc. Generally the mechanical side of Formula One.
ben_watkins
ben_watkins
0
Joined: 21 Jun 2007, 23:49
Location: UK

Explaination of McLaren J-Damper = Inerter

Post

The "J-damper" is an inerter designed by the University of Cambridge and used by McLaren and now licensed to Penske..

http://www.eng.cam.ac.uk/news/stories/2008/McLaren/
BWP
Tripos Media Partners
#TriposMediaPartners

West
West
0
Joined: 07 Jan 2004, 00:42
Location: San Diego, CA

Re: Explaination of McLaren J-Damper = Inerter

Post

http://www-control.eng.cam.ac.uk/~mcs/lecture_j.pdf

A little more info from the same person, although not in racing terms.
Bring back wider rear wings, V10s, and tobacco advertisements

timbo
timbo
111
Joined: 22 Oct 2007, 10:14

Re: Explaination of McLaren J-Damper = Inerter

Post

Great links!! Thanks a lot! =D>

pgj
pgj
0
Joined: 22 Mar 2006, 14:39

Re: Explaination of McLaren J-Damper = Inerter

Post

Great posts, thank you.
Williams and proud of it.

Carlos
Carlos
11
Joined: 02 Sep 2006, 19:43
Location: Canada

Re: Explanation of McLaren J-Damper = Inerter

Post

After several years conversation about 'J' dampers, factual information. An explanation that offers clarity. The Inerter changes linear energy/movement to rotational energy/movement. When I was a child, and still wearing shorts pants I had a handheld toy with 2 lever/grips, when you squeezed them a disc at the end would rotate faster and faster(you could get them once a year at the Fun Fair) so I can understand this Inerter. The inspiration came from electrical engineering ...ahh. A mystery explained. Brilliant work and welcome information. Thanks for the most excellent links.

Project Four
Project Four
0
Joined: 24 Jan 2008, 23:28

Re: Explaination of McLaren J-Damper = Inerter

Post

A link to another article on the inerter / J-Damper. Not much different than the Cambridge article, but has links to Penske Shocks website.

http://www.theengineer.co.uk/Articles/3 ... dte=030908

ben_watkins
ben_watkins
0
Joined: 21 Jun 2007, 23:49
Location: UK

Re: Explaination of McLaren J-Damper = Inerter

Post

Also useful links on the top right hand side here

http://www.admin.cam.ac.uk/news/dp/2008081906
BWP
Tripos Media Partners
#TriposMediaPartners

User avatar
repaf1
0
Joined: 07 Aug 2007, 04:45

Re: Explaination of McLaren J-Damper = Inerter

Post

I'm am trying to fully understand how the Inerter eliminiates vibration. Under road load the inerter will transfer liner displacement to rotational, storing the energy in a flywheel.

Does the slow release of this energy (by rotating back to its original position) coupled with the damper create less chance of further oscillation?

Can I assume the flywheel does transfer the energy back to the suspension somehow? Adding another spring to do this seems it would only create more vibrations, which is what the J-damper is trying to eliminate... Is the stored energy just lost?

zac510
zac510
22
Joined: 24 Jan 2006, 12:58

Re: Explaination of McLaren J-Damper = Inerter

Post

It sounds like it might be a bit more linear in its ability to store energy (relative to the force being input). Not that I know anything about suspension damping really but I've been trying to work out this device for quite a while!
No good turn goes unpunished.

timbo
timbo
111
Joined: 22 Oct 2007, 10:14

Re: Explaination of McLaren J-Damper = Inerter

Post

repaf1 wrote:Can I assume the flywheel does transfer the energy back to the suspension somehow? Adding another spring to do this seems it would only create more vibrations, which is what the J-damper is trying to eliminate... Is the stored energy just lost?
To understand inerter function you should concentrate on electrical analogy. In RCI network you are flexible to tune each component to get desired characteristic, suspension is similar oscillating system and you also must optimize its frequency response.

zac510
zac510
22
Joined: 24 Jan 2006, 12:58

Re: Explaination of McLaren J-Damper = Inerter

Post

timbo wrote:
To understand inerter function you should concentrate on electrical analogy. In RCI network you are flexible to tune each component to get desired characteristic, suspension is similar oscillating system and you also must optimize its frequency response.
But that's constantly changing: slow, medium, fast corners, pitch, yaw, roll..
No good turn goes unpunished.

Carlos
Carlos
11
Joined: 02 Sep 2006, 19:43
Location: Canada

Re: Explaination of McLaren J-Damper = Inerter

Post

The main advantage of it (the mass dampener) on the Renault system was in controlling the wheel oscillations riding over the curbs and I think the purpose of the inerter is the same. As timbo suggested it deals with frequency, the quick spike of movement going over curbing. The movement of the wheel accelerates the flywheel (via a screw) and the inertia of the flywheel consumes the added energy of the quick movement of the wheel over the abrupt change. That's my story and I'm sticking to it. :D

See if these don't help:
http://en.wikipedia.org/wiki/Moment_of_inertia
http://en.wikipedia.org/wiki/Rotation_a ... fixed_axis

RacingManiac
RacingManiac
9
Joined: 22 Nov 2004, 02:29

Re: Explaination of McLaren J-Damper = Inerter

Post

that's my understanding of it as well, though there is a detailed presentation about it...

http://www-control.eng.cam.ac.uk/~mcs/lecture_j.pdf

I'd imagine the implication of this is pretty huge, not just in F1 but in regular cars as well...

CMSMJ1
CMSMJ1
Moderator
Joined: 25 Sep 2007, 10:51
Location: Chesterfield, United Kingdom

Re: Explaination of McLaren J-Damper = Inerter

Post

The thing I cannot get my head around is the fact it was banned as a moveable aero device.

The details on here are great, thanks for finding them guys. =D>
IMPERATOR REX ANGLORUM

bazanaius
bazanaius
0
Joined: 08 Feb 2008, 17:16

Re: Explaination of McLaren J-Damper = Inerter

Post

The J-damper was not banned as a MAD. The mass-damper was. That's the beauty of the J-damper; the mass damper was just a mass on a spring, whereas the inerter behaves differently. hence the electrical analogy to understand how it works.