Williams FW43 Speculation Thread

A place to discuss the characteristics of the cars in Formula One, both current as well as historical. Laptimes, driver worshipping and team chatter do not belong here.
User avatar
ScrewCaptain27
577
Joined: 31 Jan 2017, 01:13
Location: Udine, Italy

Re: Williams FW43 Speculation Thread

Post

These images are probably of the FW42 wind tunnel model, but the video does give a big hint about the livery. Red, white and black.
Image
ImageImage
Image
"Stupid people do stupid things. Smart people outsmart each other, then themselves."
- Serj Tankian

astracrazy
31
Joined: 04 Mar 2009, 16:04

Re: Williams FW43 Speculation Thread

Post

If its a wind tunnel model its not going to be painted and in a livery, just carbon fiber. The white rear wing is likely just 3d printed so its white.

tomazy
205
Joined: 10 Jan 2006, 13:01

Re: Williams FW43 Speculation Thread

Post

ScrewCaptain27 wrote:
31 Jan 2020, 13:41
These images are probably of the FW42 wind tunnel model, but the video does give a big hint about the livery. Red, white and black.
https://uploads.tapatalk-cdn.com/202001 ... 845461.jpg
https://uploads.tapatalk-cdn.com/202001 ... 85d73b.jpg https://uploads.tapatalk-cdn.com/202001 ... 8860e3.jpg
https://uploads.tapatalk-cdn.com/202001 ... a5d228.jpg
This actualy might be FW43. FW42 didnt have a full shark fin from the top, but only a small one for the number and T-wing. It also never had a double T-wing like on the shown model.

astracrazy
31
Joined: 04 Mar 2009, 16:04

Re: Williams FW43 Speculation Thread

Post

tomazy wrote:
31 Jan 2020, 15:08
ScrewCaptain27 wrote:
31 Jan 2020, 13:41
These images are probably of the FW42 wind tunnel model, but the video does give a big hint about the livery. Red, white and black.
https://uploads.tapatalk-cdn.com/202001 ... 845461.jpg
https://uploads.tapatalk-cdn.com/202001 ... 85d73b.jpg https://uploads.tapatalk-cdn.com/202001 ... 8860e3.jpg
https://uploads.tapatalk-cdn.com/202001 ... a5d228.jpg
This actualy might be FW43. FW42 didnt have a full shark fin from the top, but only a small one for the number and T-wing. It also never had a double T-wing like on the shown model.
Launch spec FW42 perhaps, I'm sure that did?

Francesc
49
Joined: 20 Jun 2009, 21:44

Re: Williams FW43 Speculation Thread

Post

The shape of the sidepods of that model look like Red Bull.

tomazy
205
Joined: 10 Jan 2006, 13:01

Re: Williams FW43 Speculation Thread

Post

After watching the video on 0.25 speed, I am 94.73% that this IS FW43. On top of the before mantioned diffirances (no version on fw42 had those) , It also has more of a Red Bull uper guiding wain on top of the sidepods inlet and thiner rear susspension elements.

bill shoe
151
Joined: 19 Nov 2008, 08:18
Location: Dallas, Texas, USA

Re: Williams FW43 Speculation Thread

Post

Large vents towards the rear of the engine cover. Largely replacing sidepod outlets? Which implies little or no rear-portion of the sidepod?

Interesting pictures. My speculation above seems like it would be very adventurous for a team that was trying to recover from a dismal previous season. Maybe the vents are small and simply supplementary to conventional sidepod exits.

MTKF1
0
Joined: 31 Jan 2020, 16:16

Re: Williams FW43 Speculation Thread

Post

Nice video. I'm sure the FW42 had a similar shark fin? The t-wing is definitely new though. It is really hard to tell with the lighting, but the cooling also looks far more aggressively packaged than the ultra-conservative back end of the FW42.

Here is hoping for a far better developed, more refined car than the one it is based off.

I know they are planning on revealing the actual car on the first day of testing, does this mean then they won't be having a separate shakedown test day beforehand?

f1motta
64
Joined: 07 Apr 2011, 09:28

Re: Williams FW43 Speculation Thread

Post

Interesting shape (fin) on the "Halo":

Image

Different mirrors and mountings:

Image

New rear suspension layout:

Image

Uper guiding wain:

Image

tomazy
205
Joined: 10 Jan 2006, 13:01

Re: Williams FW43 Speculation Thread

Post

I cant get the 3D shape of the vertical silver tape in this image (the two vertical ones on the right) to make sence on an F1 car. It makes sence in the other pictures, but other pictures also have additiona horizontal tape that is missing here.

Image

pic for reference, find the maching tape on both pictures:
Image

I hope someone gets what I am talking abouth :?

I would of guessed that this was filmed all at once, so maybe the upper image is from the other side and mirrored, maybe the car is not simetrical :o ok ok, too much speculation now even for me.
f1motta wrote:
31 Jan 2020, 19:22

Different mirrors and mountings:

Image
Here the small guiding fins on top of the nose are also seen.

cheesyhoney
0
Joined: 01 Feb 2020, 00:06

Re: Williams FW43 Speculation Thread

Post

tomazy wrote:
31 Jan 2020, 15:25
After watching the video on 0.25 speed, I am 94.73% that this IS FW43. On top of the before mantioned diffirances (no version on fw42 had those) , It also has more of a Red Bull uper guiding wain on top of the sidepods inlet and thiner rear susspension elements.
If it really is the FW43 that's a disappointment, it still looks as bulky as last years car

User avatar
Lotus102
12
Joined: 26 Feb 2018, 22:29

Re: Williams FW43 Speculation Thread

Post

cheesyhoney wrote:
01 Feb 2020, 00:07
tomazy wrote:
31 Jan 2020, 15:25
After watching the video on 0.25 speed, I am 94.73% that this IS FW43. On top of the before mantioned diffirances (no version on fw42 had those) , It also has more of a Red Bull uper guiding wain on top of the sidepods inlet and thiner rear susspension elements.
If it really is the FW43 that's a disappointment, it still looks as bulky as last years car
My initial thought was that it wasn’t even the final version of the FW42 but an early wind tunnel model of last year’s car. Considering that details tend to be hidden on digital renders when the ‘launch’ is done that way, I’d be surprised if they were giving us this clear a view of the FW43’s shape this early (it’s still more than two weeks to the launch and nobody has shown us their car yet)

I really, really hope it isn’t the FW43. My gut feeling is that they aren’t showing us the new car, it’s just a video to tease the colour scheme via mood lighting. I hope I’m right. The one thing I had hoped for was tighter packaging than last year, given what Racing Point showed was possible.

User avatar
ScrewCaptain27
577
Joined: 31 Jan 2017, 01:13
Location: Udine, Italy

Re: Williams FW43 Speculation Thread

Post

On a closer look, the bargeboards look very similar to late spec FW42. So this might indeed be the new car.
"Stupid people do stupid things. Smart people outsmart each other, then themselves."
- Serj Tankian

User avatar
Lotus102
12
Joined: 26 Feb 2018, 22:29

Re: Williams FW43 Speculation Thread

Post

I think it might even be the FW41

User avatar
Mr Brooksy
15
Joined: 21 Feb 2014, 22:47
Location: Australia

Re: Williams FW43 Speculation Thread

Post

I can't imagine Williams has the resources to remove all the bulky design left over from the 42. I'm guessing the above is a version of the 43.

Williams has in recent years not really played the cloak and dagger game, I remember with the 41, everyone was sure the render released would have had way more barge board details only for the car to roll out in testing with the same spec with hardly any complex detail to everyone's shock and horror.
WilliamsF1 fan since 1989

Locked