Red Bull RB18

[organic]

High DF rear wing, similar shape to what MCS started out with, and what Ferrari is also running this weekend
https://pbs.twimg.com/media/FTIbOXaUYAA ... name=large
https://pbs.twimg.com/media/FTIbOXQUAAA ... name=large

https://cdn-1.motorsport.com/images/mgl ... -bra-1.jpg

Am I right in thinking these are two different rear wings. The first one looks a lot bigger than the second one

Just the angle. The first looks bigger because we're looking down onto it; second is raised so you can't see most of the main plane

[Drift4794]

Michael Schmidt from AMuS reports RB is losing 5kgs in Spain:

In the meantime, Red Bull has completely trimmed off the flab. For the Spanish GP, another five kilograms were saved. That puts them close to the limit.

Note that this is 2kgs lower than the first report from racingnews365 about RB losing 7kgs

[dxpetrov]

High DF rear wing, similar shape to what MCS started out with, and what Ferrari is also running this weekend
https://pbs.twimg.com/media/FTIbOXaUYAA ... name=large
https://pbs.twimg.com/media/FTIbOXQUAAA ... name=large

https://cdn-1.motorsport.com/images/mgl ... -bra-1.jpg

Am I right in thinking these are two different rear wings. The first one looks a lot bigger than the second one

Just the angle. The first looks bigger because we're looking down onto it; second is raised so you can't see most of the main plane

Exactly the same one they used in the preseason testing in Barca.

[AeroDynamic]

[AeroDynamic]

[BlueCheetah66]

Are those two bubbles towards the rear actually in the shape of the floor and are they new for this race

[jagunx51]

[Owen.C93]

Are those two bubbles towards the rear actually in the shape of the floor and are they new for this race

They aren't new. I think they are depressions for the lower wishbone movement envelope.

[CaribouBread]

Novelty on the floor

[AeroDynamic]

[jagunx51]

https://pbs.twimg.com/media/FTMTCu4XsAI ... name=large

[AeroDynamic]

https://pbs.twimg.com/media/FTMTCu4XsAI ... name=large

[tmoneyr007]

Front area of the floor below the sidepod/cooling inlet looks quite a bit different.

[Sevach]

[AeroDynamic]

flowviz on RB18 RW