Not happy until we're fastest - Pat Fry

By on

The F138 is the second car designed and built under the responsibility of Pat Fry, and this year the targets are even higher. With a restructuring process still under way within the development team, Fry says he'll only be happy when the car proves the fastest of all.

“Among the changes made to our structure has been the appointment of two Deputy Chief Designers,” Fry explained. “With some big changes coming through it’s a better way to organise ourselves, when we need to run two concurrent car projects. This year’s car is more of an evolution than a revolution, based on similar concepts to the F2012 and in all the little areas of performance where we think we can gain something, we have looked for those gains. The car has changed in subtle ways, some areas more than others, but in general, the F138 is a development of last year’s car.”

Although Fry agrees that fighting right to the end of last season for the title did have an impact on this year’s work, he is not overly concerned about it. “I think that is something that all the top teams will say,” he says. “In a way we were fortunate that we had already made the previously mentioned changes to our structure, as we were able to keep pushing on with last year’s car, while still being in reasonable shape for developing this year’s one. The biggest challenge was the aerodynamic side of things, as we started maybe three months later than is normal. We have quite a lot of catching up to do and you will see quite a lot of changes coming after the launch car: we will have some new parts for the second test and then another big upgrade for the third and final one, so lots of changes coming through.”

Another effect of the future on the present is that not much of this year’s work will be useful next season. “The fact that the 2014 car will be very different – aerodynamically the exhaust effect is changed with the turbo and exhaust positions being different, the front wing development will be new, while the rear wing constitutes another major change - means that a lot of our 2013 work will not carry over, which will put an increased work load on aero departments and the design department as well,” reckons Fry. “However, I think the design side is working very well with the changes we made, working in conjunction with the power unit team. Having said that, there’s a huge amount of work to do on both car projects and we have to get to work early on the 2014 car to be in a good position.”

One should not forget that Formula 1 is a team sport and therefore teamwork is another important constituent part of the whole package. “Apart from the car itself, you have to go after every last little bit of performance,” agrees Fry. “We have reviewed all last year’s races, to see what we did right and what we did wrong, in terms of strategy and we need to learn from that. We are trying to improve our pit stops still further and we have made some changes in that area. Hopefully we can gain another couple of tenths off our pit stop time. On average, we were consistently the best in this area last year, but you cannot afford to stand still, otherwise you find yourself dropping behind: we need to catch up to the level of teams that were quicker in pure speed terms even if they had more problems at their pit stops. We could say we were lucky at times last year on the reliability front, but you make your own luck and it reflects on the amount of work done back here at the factory: we must continue to work to be as good or even better on this front this year.”

So, is Fry pleased with the F138? The answer is long and considered: “In the last eighteen months to two years we have made major changes to our methodology and we are partway through a process and I am pleased with the progress we have made so far. But for me, our progress can never be quick enough and I feel we still have quite a lot to do to improve. I am never going to be happy unless we arrive in Melbourne and prove to have the quickest car. In terms of the launch car, we have done a good job on the mechanical installation and the design, we have hit all our stiffness targets and saved a lot of weight. However, we cannot hide the fact that, aerodynamically, the launch car is a long way behind where we are in the wind tunnel today. We will have a better idea of what our true performance level is come the third test but I’m not going to be happy until we are clearly quickest.”